WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer
Replacement washer lid lock assembly with wiring harness for GE washing machines.
WH08X32657 washer lid lock and wire harness assembly for GE washing machines.
Replacement washer lid lock and wire harness kit for GE and Hotpoint top-load washing machines.
WH08X32657 washer lid lock and harness assembly with 3-wire plug, protective coil, and switch lock for GE washers.
Two GE washer lid lock assemblies with wire harnesses for GTW series washing machines.
Instructional graphic showing GE washer lid lock installation steps with required tools list.
WH08X32657 washer lid lock and wire harness assembly for GE washing machines.
Replacement washer lid lock assembly with wiring harness for GE washing machines.
WH08X32657 washer lid lock and wire harness assembly for GE washing machines.
Replacement washer lid lock and wire harness kit for GE and Hotpoint top-load washing machines.
WH08X32657 washer lid lock and harness assembly with 3-wire plug, protective coil, and switch lock for GE washers.
Two GE washer lid lock assemblies with wire harnesses for GTW series washing machines.
Instructional graphic showing GE washer lid lock installation steps with required tools list.
WH08X32657 washer lid lock and wire harness assembly for GE washing machines.

WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer

0.00
$31.49
Save 13% $36.21
$31.49
Out of stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

WH08X32657 Washer Lid Lock and Harness Assembly

Key Features

  • Complete assembly includes the lid lock mechanism and a pre-wired 43-inch, 3-wire harness for direct connection to the control board.
  • Acts as a critical safety switch by securely locking the top-load washer lid during high-speed spin and agitation cycles.
  • Communicates electronically with the appliance control unit to prevent operation when the door is open, ensuring user safety.
  • Manufactured with heavy-duty plastic and internal metal contacts for consistent, cycle-to-cycle reliability.

Replaces / Cross-Reference Part Numbers

  • WH08X31222
  • AP7033485
  • PS16619254
  • 4963152
  • EAP16619254
  • PD00070146
  • WH08X37937
  • WH01X27954
  • WH01X26114
  • WH01X24114

Compatibility & Fitment

  • Compatible with standard top-load washing machines manufactured by General Electric (GE), Hotpoint, and RCA.
  • Fits specific GE washer models including: GTW465ASN2WW, GTW220ACK7WW, GTW335ASN2WW, GTW490ACJ6WS, and GTW500ASN1WS.
  • Fits additional GE washer models including: GTW525ACP0WB, GTW540ASP1WS, GTW685BSL2WS, GTW720BPN1DG, and GTW840CPN1DG.

When to Replace

  • The washer refuses to start, fill, wash, drain, or spin when the start button is pressed.
  • The lid fails to engage the lock mechanism when a new wash cycle is initiated.
  • The lid remains securely locked and will not release after the wash cycle has completely finished.
  • The appliance control panel continuously flashes a specific lid lock error code.

Installation Tips

  • Disconnect the washing machine from the main power supply and shut off the water valves before beginning any repairs.
  • Use a flat-blade putty knife to release the front spring clips under the main top panel, allowing the lid assembly to lift up.
  • Take a photograph of the original wire harness routing path along the chassis to ensure the new harness is secured safely away from moving tub components.
  • Unscrew the original lock mechanism, disconnect the harness from the control board, and route the new assembly into the exact same position.
WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 1
WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 2
WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 3
WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 4
  • WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 1

    WIDE COMPATIBILITY

    Our WH08X32657 Washer lid Lock and Harnessis compatible with GE & Hotpoint top-load washer.
  • WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 2

    PREMIUM MATERIAL

    This part is made from high-quality materials and well-tested by the manufacturer. Ensure effective performance.
  • WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 3

    SAVING SOLUTION

    Effortlessly repair your Washer with our Lid Lock and Harness - BlueStars brings DIY solutions to help you deal with any trouble.
  • WH08X32657 WH08X31222 WH08X37937 Washer Lid Lock and Harness Kit - ForGE Washer 4

    SIMPLE INSTALLATION

    Just 5 minutes of replacing to make your Washer run like new!
ENJOY YOUR LIFE WITH OUR PART INSIDE!

ENJOY YOUR LIFE WITH OUR PART INSIDE!

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

This kit is a direct replacement for OEM part numbers WH08X32657, WH08X31222, and WH08X37937. It also replaces AP7033485, PD00070146, 4963152, PS16619254, and EAP16619254.
This assembly is compatible with a wide range of GE, Hotpoint, and RCA top-load washers. Common compatible models include GTW220ACK7WW, GTW335ASN2WW, GTW465ASN2WW, GTW465ASN9WW, HTW240ASK6WS, GTW490ACJ6WS, GTW500ASN1WS, and GTW525ACP0WB.
You likely need to replace the lid lock if your washer fails to start a cycle, stops mid-cycle, refuses to spin, or displays a flashing lid lock light/error code. If the machine cannot confirm the lid is closed and locked, it will prevent the motor from engaging for safety reasons.
Replacing the lid lock is a manageable repair that typically takes 30 to 45 minutes. You will generally need a putty knife to release the spring clips under the top panel, a screwdriver to remove the mounting screws, and a socket set. Always ensure the washer is unplugged from the power source before beginning any work.
Before replacing the assembly, ensure the lid is not physically obstructed and that the striker (the hook on the lid) is not broken or misaligned. Additionally, check the wiring harness connections for any signs of corrosion or loose pins, as these can sometimes mimic a failed lock switch.
Yes, this lid lock assembly is designed to operate on standard 120V electrical systems and is compatible with both 50Hz and 60Hz frequencies.