[CSA Listed] Natural Gas to Propane Conversion Kit Weber Genesis

[CSA Listed] Natural Gas to Propane Conversion Kit Weber Genesis

Key Features

• Converts compatible Weber gas grills from natural gas to propane.
• Includes one 5-foot propane regulator hose with a QCC1/Type 1 connector and 3/8-inch female flare fitting.
• Includes two types of 3/8-inch fittings.
• Includes 14 LP orifices in three sizes for different Weber grill BTU outputs: three for 7,000 BTU grills, eight for 11,000 BTU grills, and three for 21,000 BTU grills.
• Includes two instruction manuals.
• The hose assembly is CSA C-US certified, certification No. 238554, to the UL 569 standard.
• Solid brass fittings and orifices provide the connection hardware for the conversion.
• The regulator has a 90-degree design and an excessive-flow shutoff feature. Its aluminum-alloy body is designed to resist cracking and rust.
• Includes gas-rated PTFE tape and an upgrade wrench.
• Covered by lifetime protection for defects or issues.

Replaces / Cross-Reference Part Numbers

• Item Model Number: 698183
• CSA certification No. 238554

Compatibility & Fitment

This kit is designed for listed Weber Genesis and Spirit gas grill models, including:

• Weber Genesis Silver, Gold, and Platinum A-D series
• Weber Genesis 1000-3000 series
• Weber Genesis SX-325S, SX-335, SPX-435, SP-E-325S, S-325S, and S/E/SE/EP/CEP 210-335
• Weber Genesis II S, E, SX, EX, and SE 210-435 and 610 series
• Weber Genesis II LX S and E 240-640 series
• Weber Spirit II 310, 315, E310, 210, and 215 models

It does not fit portable Weber Q or Weber Traveler grills. Check the grill's connection size, thread type, gas type, and BTU requirement before purchase and installation.

When to Replace

• Use this kit when converting a compatible Weber grill from natural gas service to propane.
• Replace a conversion hose assembly when the hose, regulator, or fittings show damage, cracking, corrosion, or suspected leakage.
• Select the orifice size that matches the grill's required BTU output. Incorrect orifice selection can affect burner performance.

Installation Tips

• Confirm the grill model, fuel type, connection size, thread type, and BTU requirement before beginning work.
• Use the included wrench and gas-rated PTFE tape where appropriate for the threaded connections. Do not use tape on flare-sealing surfaces.
• Install the correct LP orifices for the grill's BTU output and connect the QCC1/Type 1 fitting to the propane tank.
• Keep the hose routed without sharp bends or contact with hot surfaces. The 90-degree regulator design helps position the tank connection.
• After installation, apply soapy water to the connections and check for bubbles. Do not operate the grill if a leak is present.
• Follow the included instruction manuals and applicable gas-safety requirements during installation.