W83247 Pool Cleaner Hose Weight for Zodiac Baracuda MX8, MX6, Hayward Navigator & Pentair Kreepy Krauly - 4 Pack

W83247 / X70105 Universal Pool Cleaner Hose Weight

Key Features

• Precision Buoyancy Control: Engineered to provide the exact amount of counter-weight needed to keep suction-side cleaners flat on the pool floor, preventing "porpoising" or the cleaner lifting off the surface during operation.
• Universal Snap-On Design: Features a flexible, high-tension clip mechanism that fits securely onto standard 1-1/2 inch (38mm) pool cleaner hoses from multiple manufacturers without the need for tools.
• Lead-Filled Stability: The internal weighted core is completely encased in a durable plastic shell, providing concentrated weight to balance the cleaner's head and ensure deep-cleaning coverage in corners and inclines.
• UV & Chemical Resistant: Constructed from high-impact polymer designed to withstand the degrading effects of direct sunlight and high-sanitizer pool environments, preventing the weight from becoming brittle or cracking.
• Anti-Tangle Performance: By properly weighting the first and second hose sections, these weights help maintain the correct hose "arch," significantly reducing the frequency of hose tangling and knots.

Replaces / Cross-Reference Part Numbers

• W83247
• X70105
• K12054
• K12454

Compatibility & Fitment

This hose weight is designed to be a universal solution for the most popular suction-side pool cleaners on the market. Key compatible models include:

• Zodiac / Baracuda: Fits MX8, MX8 Elite, MX6, MX6 Elite, G3, G4, and Alpha 2/3 models.
• Hayward: Compatible with Navigator, Navigator Pro, Pool Vac Ultra, Pool Vac XL, and Goby series.
• Pentair: Direct fit for Kreepy Krauly, Great White, Dorado, and Warrior suction cleaners.
• Note: Most manufacturers recommend placing the first weight approximately 1 to 3 feet from the cleaner head to ensure the unit stays submerged and balanced.

When to Replace

• Cleaner Lifting Off Floor: If the cleaner frequently "stands up" or floats toward the surface, your existing weights may have shifted or been lost.
• Broken Retaining Clips: If the weight no longer snaps tightly onto the hose and slides around, the plastic tension tabs have failed.
• Visible Leaking or Cracking: If the outer plastic shell is cracked, the internal lead can be exposed to pool water or fall out, posing a safety risk.
• Inefficient Cleaning Path: If the cleaner is spinning in circles or skipping large sections of the pool, it often indicates an imbalance in hose buoyancy.

Installation Tips

• Proper Placement: PRO TIP: For most Zodiac and Hayward cleaners, place the first weight on the first hose section (the one connected to the cleaner). For Pentair Kreepy Krauly models, the weight is often placed slightly further back on the second section.
• The "Snap" Test: Ensure the weight "clicks" firmly into place. If the hose is slippery, wipe the area with a dry cloth before clipping the weight on to prevent it from sliding during the pump cycle.
• Fine-Tuning: If the cleaner's "nose" is digging into the floor too hard, move the weight further away from the cleaner. If the tail is lifting, move the weight closer to the cleaner head.
• Check for Hose Memory: If your hoses have a "set" curve from being stored in a coil, use these weights to force the hose into a more natural arch for better mobility.