Waterproof Aluminum Wall Socket Passthrough Kit for Starlink Mini | DC 5.5x2.1mm Female Bulkhead Connector & Power Adapter for RV Camper Boat Battery Box Truck
Waterproof Aluminum Wall Socket Passthrough Kit for Starlink Mini
Key Features
- Standard 5.5 × 2.1 mm DC female bulkhead connector for Starlink Mini power connections.
- Supports 12–48 V input and up to 5 A current.
- Precision CNC-machined, anodized aluminum housing for durable outdoor and mobile use.
- Aluminum construction helps resist corrosion, impacts, UV exposure, and vibration.
- Includes a silicone O-ring, foam mounting gasket, and protective rubber cap to help reduce moisture, dust, dirt, and environmental exposure.
- Suitable for RV, camper, boat, caravan, truck, and battery-box installations.
- Includes lifetime protection for product defects or issues.
Replaces / Cross-Reference Part Numbers
This kit provides a panel or flush-mount replacement connection for installations requiring a 5.5 × 2.1 mm DC female socket. It is designed for Starlink Mini power setups and other compatible applications using the same connector specification.
Compatibility & Fitment
Designed for Starlink Mini systems using a standard 5.5 × 2.1 mm DC female connection. The socket supports 12–48 V input and up to 5 A current. Verify the voltage, current, connector polarity, and available mounting space in your setup before purchase.
- Compatible installation types: panel mount and flush mount.
- Suitable equipment and locations: RVs, boats, campers, caravans, trucks, battery boxes, and other mobile or outdoor setups.
- Included faceplate size: 2.36 × 2.36 inches.
When to Replace
Replace a damaged or worn socket when the connector becomes loose, power cuts out during movement or vibration, the housing or wiring shows damage, or the seal no longer limits moisture and dirt exposure. A replacement is also appropriate when corrosion or a damaged mounting thread prevents a secure connection.
Installation Tips
- Choose a mounting location that accommodates the socket, faceplate, gasket, and cable bend radius.
- Use the included 2.36 × 2.36 inch faceplate for panel mounting, or use the integrated threaded aluminum nut for a recessed flush-mount appearance.
- Position the silicone O-ring and foam mounting gasket correctly before tightening the socket.
- Secure the assembly with the included stainless steel screws.
- The included 160 mm (6.3 inch) female-to-female adapter cable is pre-wired with 18 AWG copper wire, allowing installation without cutting or splicing.
- Connect the wiring, confirm polarity and electrical ratings, then attach the Starlink Mini or other compatible device.
- Fit the protective rubber cap when the socket is not in use to help reduce environmental exposure.
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
