[Lifetime Warranty] Pool Ladder Bumpers for Inground Pool - Rubber Pool Ladder End Caps fit 1.9" Standard Tubing - White Inside Plug Protective Bumper Pool Step Covers, Inground Pool Ladder - Pack of 4
Set of four white rubber pool ladder end caps for 1.9-inch inground pool ladder tubing.
Two white rubber pool ladder bumpers for 1.9-inch tubing shown from top and side angles.
Dimensional diagram of white rubber pool ladder bumper end caps showing 1.9-inch tubing compatibility.
White rubber pool ladder bumper showing compatibility with 1.9-inch standard inground pool ladder tubing.
Durable white rubber pool ladder bumper end caps for 1.9-inch tubing, showing side and bottom view.
Comparison graphic showing pool ladder tube with debris versus protected with white rubber end cap bumper.
Comparison showing pool wall damage before and after using protective rubber pool ladder bumper end caps.
Hand holding white rubber pool ladder bumper plug for installation into 1.9-inch inground pool ladder tubing.
White rubber pool ladder bumper end cap with non-slip textured surface for 1.9-inch inground pool ladder tubing.
Set of four white rubber pool ladder end caps for 1.9-inch inground pool ladder tubing.
Two white rubber pool ladder bumpers for 1.9-inch tubing shown from top and side angles.
Dimensional diagram of white rubber pool ladder bumper end caps showing 1.9-inch tubing compatibility.
White rubber pool ladder bumper showing compatibility with 1.9-inch standard inground pool ladder tubing.
Durable white rubber pool ladder bumper end caps for 1.9-inch tubing, showing side and bottom view.
Comparison graphic showing pool ladder tube with debris versus protected with white rubber end cap bumper.
Comparison showing pool wall damage before and after using protective rubber pool ladder bumper end caps.
Hand holding white rubber pool ladder bumper plug for installation into 1.9-inch inground pool ladder tubing.
White rubber pool ladder bumper end cap with non-slip textured surface for 1.9-inch inground pool ladder tubing.
Lifetime Warranty

[Lifetime Warranty] Pool Ladder Bumpers for Inground Pool - Rubber Pool Ladder End Caps fit 1.9" Standard Tubing - White Inside Plug Protective Bumper Pool Step Covers, Inground Pool Ladder - Pack of 4

Save 13%
0.00
$16.15
$18.57
$16.15
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

Pool Ladder Bumpers for Inground Pool - Rubber Pool Ladder End Caps fit 1.9" Standard Tubing - Pack of 4

Key Features

  • Package contains four individual ladder bumpers.
  • Constructed from durable, non-marking white rubber.
  • Designed as an internal plug to securely fit inside ladder tubing.
  • Protects pool liners and surfaces from scratches and dents caused by ladder ends.
  • Bumper Base Diameter: 2.25 inches.

Replaces / Cross-Reference Part Numbers

  • Serves as a universal replacement for standard bumpers on most inground pool ladders requiring an internal plug for 1.90-inch OD tubing.

Compatibility & Fitment

  • Fits standard inground pool ladders with 1.90-inch outer diameter (OD) tubing.
  • Designed specifically for inground swimming pool applications.
  • Not intended for use with above-ground pool ladders.

When to Replace

  • Existing bumpers are cracked, hardened, brittle, or worn down.
  • Bumpers are missing, exposing the sharp metal edge of the ladder tube.
  • The current bumper no longer fits securely and falls out.

Installation Tips

  • Ensure the inside of the ladder tube is clean and dry before installation.
  • Remove the old bumper completely. Pliers may be required if it is stuck.
  • Align the new bumper's plug with the opening of the ladder tube.
  • Press the bumper firmly into the tube until it is seated flush. A rubber mallet may be used to gently tap it into place.

FAQ

These bumpers are made for inground pool ladder rails that use standard 1.9-inch tubing. They are intended to fit inside the open ends of the ladder tubing as protective end caps. Because ladder designs vary by manufacturer, confirm your rail tubing diameter before ordering.
Pool ladder bumpers help cushion the contact point between the ladder and the pool wall. They also cover the tube ends, which can help reduce scuffing, rubbing, and wear where the ladder sits against the pool surface.
Common signs include missing caps, cracked or hardened rubber, loose-fitting plugs, visible wear marks on the pool wall near the ladder, or metal tube ends contacting the pool surface directly. If the old bumpers no longer stay seated or no longer provide cushioning, replacement is a good idea.
Installation is usually straightforward. In most cases, you remove the old worn bumpers, clean the inside of the ladder tube ends, and press the new plugs into place. A soft mallet or gentle hand pressure may help seat them evenly. Installation time is typically just a few minutes for a full set.
Yes. Inspect the ladder tube ends for corrosion, deformation, sharp edges, or debris that could prevent a secure fit. It also helps to clean off scale, dirt, or old rubber residue so the new bumpers seat properly and make even contact.
These parts commonly wear out from constant water exposure, pool chemicals, UV exposure, temperature changes, and repeated pressure where the ladder rests against the pool wall. Over time, the material can harden, crack, shrink, or loosen inside the tubing.