Pack of 2 Project Box with Fixed Ear IP65 ABS Plastic

Pack of 2 Project Box with Fixed Ear IP65 ABS Plastic

Key Features

• Quantity: 2 enclosures per pack
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Ingress Protection Rating: IP65 (dust-tight and protected against water jets)
• Design: Integrated external mounting ears for fixed installation
• Construction: Includes rubber gasket seal and brass threaded inserts
• External Dimensions (L x W x H): 3.94 x 2.68 x 1.97 inches (100 x 68 x 50 mm)

Replaces / Cross-Reference Part Numbers

• General-purpose enclosure for custom electronic projects.
• Can be used as a substitute for other plastic enclosures with similar dimensions and an IP65 or lower rating.

Compatibility & Fitment

• Suitable for housing custom PCBs, terminal blocks, and electronic components for indoor or outdoor use.
• The internal volume and mounting points are designed for DIY electronics, power supplies, and control nodes.
• Verify component dimensions against the internal dimensions of the box before assembly.

When to Replace

• Replace if the enclosure exhibits cracks, holes, or warping that compromises its structural integrity.
• Replace if the lid seal or gasket is damaged, brittle, or missing, which would void the IP rating.
• Replace if mounting ears are broken or internal threaded inserts are stripped.

Installation Tips

• Ensure the gasket is properly seated in the lid groove before tightening screws to maintain the seal.
• Use the fixed ears with appropriate hardware to mount securely to a flat surface.
• When drilling holes for cable glands or switches, use a step bit to create clean openings without cracking the plastic.
• Tighten lid screws evenly in a cross pattern to ensure uniform pressure on the gasket. Do not overtighten.