[CSA Certified F276136 Propane Low Pressure Regulator 11" W.C.

CSA Certified F276136 Propane Low Pressure Regulator 11" W.C.

Key Features

• CSA C-US certified propane low-pressure regulator.
• Provides a steady outlet pressure of 11" water column.
• Maximum flow capacity of 75,000 BTU/hr.
• POL connection with a standard 3/8-inch male flare fitting for hoses with 3/8-inch female flare connectors.
• Includes an over-pressure relief valve, flame arrestor, and built-in safety switch that shuts off the gas supply when no flow is detected.
• Aluminum alloy construction for outdoor use.
• Designed for low-pressure appliances; it is not suitable for high-pressure appliances.
• Covered by the stated lifetime protection for defects or issues.

Replaces / Cross-Reference Part Numbers

• F276136
• Mr. Heater F276136 11" W.C. LP regulator

Compatibility & Fitment

This regulator is designed for 15–100 lb propane tanks and low-pressure appliances rated at 75,000 BTU/hr or less, including tabletop fire pits, heaters, BBQ grills, camping stoves, RVs, campers, and trailers with compatible connections.

The package includes four adapters: 3/8-inch male flare to 1/4-inch NPT male, 3/8-inch male flare to 3/8-inch male NPT, 3/8-inch male flare to 3/8-inch male flare, and 3/8-inch male flare to 1/2-inch female NPT. Adapter dust covers are also included. Check the equipment connection size and thread type before installation.

When to Replace

Replace the regulator when the appliance receives inconsistent gas pressure, fails to maintain normal burner performance, or the existing regulator shows damage, wear, corrosion, or connection problems. Confirm that the replacement is intended for a low-pressure system with an 11" W.C. requirement and a maximum demand of 75,000 BTU/hr.

Installation Tips

• Verify the propane tank connection, hose fitting, thread size, and thread type before starting.
• Connect the POL side to the propane tank and the appropriate adapter or hose fitting to the regulator outlet.
• Apply the included Teflon thread sealing tape to applicable threaded connections, then tighten with an adjustable wrench.
• Do not use thread tape on connections that seal with a flare or other non-threaded sealing surface.
• Inspect all connections for leaks according to safe propane service practices before operating the appliance.
• Use only with low-pressure appliances; do not install on high-pressure equipment.