C3-EL43C Carburetor Tune-Up Kit - For Husqvarna 2013 K750 K760 Cutoff Saws 510181202 Air Filter Fuel Line Spark Plug
C3-EL43C carburetor tune-up kit for Husqvarna K750 K760 saws including air filter, spark plug, and fuel lines.
C3-EL43C carburetor for Husqvarna K750 and K760 cutoff saws with promotional text overlay.
C3-EL43C carburetor tune-up kit components including air filter, fuel lines, spark plug, gaskets, and primer bulb.
Dimensional diagram of C3-EL43C carburetor tune-up kit components for Husqvarna K750 K760 K770 cutoff saws.
C3-EL43C carburetor for Husqvarna K750, K760, and K770 cutoff saws with compatibility and part number information.
C3-EL43C carburetor replacement for Husqvarna K750 K760 cutoff saws showing detailed component close-ups.
Multi-angle view of C3-EL43C carburetor for Husqvarna K750 and K760 cutoff saws.
C3-EL43C carburetor replacement for Husqvarna K750 K760 cutoff saws to fix engine starting and performance issues.
Replacement air filter for Husqvarna K750 K760 cutoff saws showing 99% filtration efficiency against dust and dirt.
C3-EL43C carburetor tune-up kit for Husqvarna K750 K760 saws including air filter, spark plug, and fuel lines.
C3-EL43C carburetor for Husqvarna K750 and K760 cutoff saws with promotional text overlay.
C3-EL43C carburetor tune-up kit components including air filter, fuel lines, spark plug, gaskets, and primer bulb.
Dimensional diagram of C3-EL43C carburetor tune-up kit components for Husqvarna K750 K760 K770 cutoff saws.
C3-EL43C carburetor for Husqvarna K750, K760, and K770 cutoff saws with compatibility and part number information.
C3-EL43C carburetor replacement for Husqvarna K750 K760 cutoff saws showing detailed component close-ups.
Multi-angle view of C3-EL43C carburetor for Husqvarna K750 and K760 cutoff saws.
C3-EL43C carburetor replacement for Husqvarna K750 K760 cutoff saws to fix engine starting and performance issues.
Replacement air filter for Husqvarna K750 K760 cutoff saws showing 99% filtration efficiency against dust and dirt.

C3-EL43C Carburetor Tune-Up Kit - For Husqvarna 2013 K750 K760 Cutoff Saws 510181202 Air Filter Fuel Line Spark Plug

0.00
$40.47
Save 11% $45.33
$40.47
In stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

C3-EL43C Carburetor Tune-Up Kit

Key Features

  • Complete All-in-One Maintenance Solution: Includes a precision-calibrated carburetor, high-efficiency air filter, gasket, fuel line, fuel filter, primer bulb and spark plug, providing everything needed for a full engine refresh in one package.
  • Optimized Fuel-Air Mixing: The C3-EL43C carburetor is engineered to deliver a precise fuel mixture, ensuring the high-torque performance required for heavy-duty concrete and masonry cutting.
  • Enhanced Filtration Protection: Features a high-capacity pleated air filter (578243401) designed to trap ultra-fine concrete dust and debris, significantly extending the life of the engine's cylinder and piston.
  • Ethanol-Resistant Components: The fuel lines and internal carburetor gaskets are manufactured from high-grade polymers that resist swelling and cracking when exposed to modern ethanol-blended fuels.
  • Reliable Ignition Spark: Includes a premium-grade spark plug with a heat range specifically matched for the high-operating temperatures of Husqvarna cutoff saws, ensuring consistent starts and smooth idling.

Replaces / Cross-Reference Part Numbers

  • Carburetor: 510 18 12-02, 510181202, Zama C3-EL43C, C3-EL53.
  • Air Filter: 578 24 34-01, 578243401, 544 18 16-02, 544181602.
  • Spark Plug: NGK BPMR7A, Champion RCJ6Y.

Compatibility & Fitment

This tune-up kit is specifically designed for Husqvarna’s professional-grade power cutters produced after 2013. Key compatible models include:

  • Husqvarna K750: Fits 2013 and newer models (verify the carburetor style).
  • Husqvarna K760: Direct fit for the standard K760 and K760 II models.
  • Husqvarna K770: Compatible with the newest generation K770 cutoff saws.
  • Zama Platforms: Replaces Zama C3-EL43C and C3-EL53 series carburetors.
  • Note: Please ensure your saw utilizes the external primer bulb system and the pleated square air filter before ordering, as older legacy models may use a foam-only filter system.

When to Replace

  • Saw Won't Start or Hard Starting: The most common symptom; internal carburetor passages are clogged with dust or "varnished" fuel from the previous season.
  • Engine "Bogs Down" Under Load: The saw runs at idle but loses power or dies as soon as the blade hits the concrete, indicating a restricted high-speed fuel circuit.
  • Erratic Idle (Surging): The engine speed fluctuates or "hunts" at idle, often caused by an air leak in the fuel line or a dirty low-speed jet.
  • Visible Fuel Leaks: Gasoline is dripping from the air filter housing or the fuel lines have become brittle and cracked due to age.
  • Poor Fuel Economy/Black Smoke: The carburetor is running too "rich," wasting fuel and quickly fouling the spark plug with carbon deposits.

Installation Tips

  • Safety First: Ensure the saw is completely cool. CRITICAL: Work in a well-ventilated area and drain all remaining fuel from the tank before disconnecting any lines.
  • Dust Control: PRO TIP: Before removing the old carburetor, use compressed air to blow off the concrete dust from the exterior of the saw. You do not want dust entering the intake manifold during the swap.
  • Line Routing: Take a photo of the fuel and pulse line routing before removal. If the "In" and "Return" lines are swapped, the primer bulb will not function and the saw will not start.
  • Filter Pre-Check: Ensure the new air filter is seated perfectly in the housing. Even a small gap will allow concrete dust to bypass the filter and cause catastrophic engine failure within minutes.
  • Fine-Tuning: Most carburetors come pre-set. However, if the saw hesitates on acceleration, you may need a specialized splined tool to adjust the "H" (High) and "L" (Low) needles by 1/8th turn to match your local altitude and fuel type.

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

This kit is commonly listed for Husqvarna K750, K760, and K770 cutoff saws, including some listings for the Husqvarna 510 series and K760 Rescue/Cut-n-Break variants. Some cross-references also mention Partner K750 applications. Because cutoff saws can use different carburetor versions by serial range or production year, the safest match is to verify the carburetor and OEM numbers on your original part before ordering.
The title and cross-references point to these numbers: 578243401, 510181202, 510181203, C3-EL43C, C3-EL43, C3-EL53, C3-EL29A, C3-EL29B, C3-EL29C, and 503283209. Spaced versions seen in listings include 578 24 34-01, 510 18 12-02, and 503 28 32-09. Match both the equipment model and the carburetor number on your current unit for the best fit.
Typical symptoms include hard starting, needing choke too long, bogging under load, poor acceleration, surging at idle, fuel leakage, or the saw dying when throttled up. On cutoff saws, restricted fuel flow, a dirty air filter, cracked fuel line, weak spark plug, or a carburetor diaphragm stiffened by old fuel can all cause similar problems, which is why a tune-up kit is often installed as a set.
Yes. Several cross-reference listings note that this carburetor style may have an extra fuel inlet used for certain K750 applications. On some setups, that extra inlet must be blocked off if your saw does not use it. Compare the hose routing on your original carburetor before installation and do not leave any unused fuel port open.
Drain stale fuel, inspect the fuel tank for debris, confirm the fuel lines are routed correctly, and check the intake gaskets and primer bulb for leaks. It is also smart to inspect the impulse passage, air filter housing, and fuel filter. If the old carburetor failed due to contaminated fuel or deteriorated lines, replacing only the carb without cleaning the system can cause repeat problems.
For someone familiar with small-engine service, this is usually a moderate repair that takes about 30 to 60 minutes. Typical tools include a screwdriver set, nut driver or socket set, needle-nose pliers, and a pick for fuel lines. Take a photo of the linkage and fuel-line routing before removal, since correct hose placement and throttle linkage orientation are important on Husqvarna cutoff saws.