C350GN S97017068 Bathroom Ceiling Fan Grille Cover with Springs - For Broan NuTone 690 693 694 695 696N VC305C3N VC307C2N - 2 Pack
0.00
Regular price
$30.00
Regular price
Save 11%
$33.60
Sale price
$30.00
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
S97017068 Bathroom Exhaust Fan Grille Cover with Springs
Key Features
- Constructed from durable, moisture-resistant polymeric plastic designed to withstand humid bathroom environments without rusting or warping.
- Features a clean, low-profile louvered design to maximize exhaust airflow while completely concealing the internal blower motor assembly.
- Includes two pre-installed heavy-duty tension springs to ensure a tight, rattle-free fit against the ceiling drywall.
- Neutral white finish seamlessly blends with standard ceiling paints and trim.
Replaces / Cross-Reference Part Numbers
- Broan / NuTone: C350GN, S97017068, 97017068, GIDDS-653115
Compatibility & Fitment
- Compatible with standard Broan and NuTone bathroom ventilation fan housings.
- Fits specific fan models including: 678, 679, 680, 684, 688, 689, 770, 771, HD50, and HD80.
- Designed to fit fan housings measuring approximately 8 inches by 8-1/4 inches.
When to Replace
- The existing plastic cover has severely yellowed, stained, or degraded due to age and continuous heat exposure.
- The mounting springs are stretched, broken, or missing, causing the grille to sag away from the ceiling or vibrate audibly during operation.
- The outer edges or internal plastic louvers are cracked or completely broken off.
- Completing a bathroom renovation and requiring a clean, factory-fresh aesthetic.
Installation Tips
- Disconnect power to the fan at the wall switch before cleaning the housing or installing the new component.
- Take the opportunity to vacuum out accumulated dust, cobwebs, and lint from the fan motor and blower wheel before covering the unit to maximize exhaust efficiency.
- To install, simply squeeze the two prongs of each metal spring together and insert them into the corresponding narrow mounting slots located inside the metal fan housing.
- Push the grille firmly upward until the springs retract and hold the cover completely flush against the ceiling surface.
COMPATIBLE MODELS
Broan-NuTone Bathroom Ceiling Fan: 690, 692, 693, 694, 695, 696, 695-R01, 695-R02, 695-R03, 696MFG, 696MTL, 696N, 696N-220, 696N220-R01, 696ND, 696-NE, 696N-R01, 696N-R02, 696N-R03, VC305C3N, and VC307C2N (*Note: This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility)
4 SIMPLE STEPS
No tools required - installs in under 5 minutes with no cutting or drywall patching needed: 1. Take off the old cover from the ceiling; 2. Hook the springs into the slots on the new grille; 3. Compress the springs and insert them into the fan housing; 4. Let the grille snap into place against the ceiling.
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
