[Lifetime Warranty] AXV604WHP Pool Cleaner Wing Kit Replacement - Compatible with Hayward Navigator, Pool Vac Ultra Cleaners
Two white replacement wing kit parts for Hayward Navigator and Pool Vac Ultra pool cleaners.
Two white replacement wing kit parts for Hayward Navigator and Pool Vac Ultra pool cleaners.
Lifetime Warranty

[Lifetime Warranty] AXV604WHP Pool Cleaner Wing Kit Replacement - Compatible with Hayward Navigator, Pool Vac Ultra Cleaners

Save 13%
0.00
$15.70
$18.06
$15.70
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

AXV604WHP Pool Cleaner Wing Kit

Key Features

  • Enhanced Suction Velocity: Engineered with a specialized "skirt" profile that maintains a tight seal against the pool floor, funneling water and debris directly into the throat of the cleaner for maximum pickup efficiency.
  • Heavy-Duty Flexible Polymer: Manufactured from a high-grade, chemical-resistant white plastic that remains pliable in cold water while resisting the abrasive "sanding" effect of plaster and pebble pool surfaces.
  • Optimized Climbing Geometry: The aerodynamic wing shape provides the necessary downforce and lateral stability to help the cleaner transition from the floor to the walls without floating or stalling.
  • Snap-Lock Mounting System: Features precision-molded mounting tabs that snap securely into the cleaner's side pods, ensuring the wings stay attached during high-suction operation or when encountering obstacles.
  • WHP "White" Series: Specifically color-matched for Hayward "White" series cleaners, providing an OEM look and feel for a seamless aesthetic repair.

Replaces / Cross-Reference Part Numbers

  • Primary Part Number: AXV604WHP.

Compatibility & Fitment

This wing kit is a universal fit for the Hayward "A-Frame" suction cleaner chassis. Key compatible models include:

  • Hayward Navigator: Fits all standard Navigator and Navigator Pro models.
  • Hayward Pool Vac: Compatible with Pool Vac, Pool Vac Ultra, and Pool Vac XL.
  • Arneson: Direct replacement for older Arneson Pool Vac units.
  • Note: This is a side-specific kit. One wing is labeled for the Left side and the other for the Right side of the cleaner body to ensure proper hydrodynamic flow.

When to Replace

  • Worn or "Ragged" Edges: If the bottom edge of the wing has been sanded down until it is thin or jagged, it will no longer create the vacuum seal needed to lift dirt.
  • Loss of Wall Climbing: When wings become too stiff or overly worn, the cleaner loses the "grip" required to navigate vertical surfaces.
  • Cleaner Stalling: If the cleaner frequently gets stuck on floor returns or main drains, the wings are likely too short to provide the necessary lift over obstacles.
  • Visible Cracks: Physical breaks in the mounting tabs or the wing body will cause the wing to flap loosely or fall off entirely during use.

Installation Tips

  • Check the Pods: PRO TIP: Before snapping on the new wings, inspect your Side Pods (AXV417WHP). If the pods are heavily worn or "bottomed out," even brand-new wings won't sit at the correct height to provide optimal suction.
  • Identify Left and Right: Look for the small "L" and "R" markings molded into the plastic. Installing them on the wrong sides will cause the cleaner to spin or behave erratically.
  • The "Snap" Test: Ensure the mounting tabs click fully into the slots. If they don't stay in, check the slots on the cleaner for pebbles or debris that might be blocking the lock.
  • Balance Check: After installation, place the cleaner in the pool and check its movement. It should sit flat on the floor; if it tilts, the wings may not be seated evenly.

FAQ

This wing kit is designed for Hayward suction-side cleaners, including the Navigator, Navigator Pro, Pool Vac, Pool Vac Ultra, Pool Vac Plus, Pool Vac Classic, and Pool Vac XL. To ensure compatibility, verify your existing wing kit part number is AXV604WHP and confirm your specific cleaner model.
The primary part number for this kit is AXV604WHP. It is compatible with AXV417WHP wings and is frequently included in the AXV414604WHP maintenance combo kit, which also features AXV414P pod shoes. When ordering, determine if you require the complete AXV604WHP kit or additional wear components.
Worn or damaged wings often result in reduced wall climbing, poor floor coverage, erratic movement, loss of balance, or the cleaner becoming stuck frequently. Visible cracks, deformation, loose components, or missing mounting hardware are clear indicators that the wing kit requires replacement.
The AXV604WHP wing kit includes a complete replacement set consisting of two wings and four mounting blocks. Please verify the package contents upon receipt to ensure all necessary components for your specific repair are included.
Installation is a straightforward process that typically takes 10 to 20 minutes. Simply remove the old wings and mounting blocks, clear any debris from the attachment points, and secure the new pieces in the original orientation. No advanced tools are required, though referencing your cleaner's parts diagram is recommended.
When replacing the wings, inspect other high-wear items such as the pod shoes and the flap. Because the AXV604WHP wing kit is often used in conjunction with AXV414P pod shoes and the AXV414604WHP combo kit, these parts often wear at similar rates. Additionally, check for clogged hoses, insufficient suction, or debris buildup that may impact cleaner performance.