ADQ56656403 Lint Filter for LG Dryers & WashTowers - 11.2" x 10.9" Lint Filter with Cleaning Brush

ADQ56656403 Dryer Lint Filter

Key Features

• Replacement lint filter screen measuring approximately 11.2 x 10.9 inches (28.4 x 27.6 cm).
• Made with an ABS plastic frame and high-density fiber mesh for daily dryer use.
• Supports lint filtration and proper dryer airflow while locking securely into place.
• Waterproof, easy-to-clean mesh for continued maintenance.
• Includes one bendable cleaning brush for reaching lint inside the filter slot.
• Package includes 1 lint filter replacement and 1 bendable dryer vent lint brush.

Replaces / Cross-Reference Part Numbers

• ADQ56656403
• ADQ56656401
• 4960837
• AP7012980
• PS16546780
• EAP16546780

Compatibility & Fitment

Compatible with specific LG dryer models:

• LEX4070V, DLEX4070W, DLEX4080B, DLEX4200B, DLEX4200W, DLEX4270V, DLEX4270W, DLEX4370K, DLEX4370W, DLEX4500B, DLEX5500V, DLEX6500B, DLEX6700B
• DLGX4071V, DLGX4071W, DLGX4081B, DLGX4201B, DLGX4201W, DLGX4271V, DLGX4271W, DLGX4371K, DLGX4371W, DLGX4501B, DLGX5501W, DLGX6501B, DLGX6701B

Compatible with specific LG WashTower models:

• SWWE50N3, SWWG50N3, WKE100HVA, WKE100HWA, WKEX200HBA, WKEX200HGA, WKEX200HRA, WKEX200HWA, WKEX300HBA
• WKG101HVA, WKG101HWA, WKGX201HBA, WKGX201HGA, WKGX201HRA, WKGX201HWA, WKGX301HBA, WSEX200HNA

Measure the original filter before ordering. The original should be approximately 11.2 x 10.9 inches. This filter has no ears on the top and is narrower than the ADQ56656401 filter. It also has no felt seal and is smaller than the 5231EL1003B filter. Do not use this replacement if the existing filter has top ears or a felt seal.

When to Replace

• Replace the filter if the frame is cracked, warped, or no longer locks securely in place.
• Install a new filter when the mesh is torn, clogged, or difficult to clean.
• Restricted airflow and lint bypass are signs that the filter may no longer be performing correctly.
• Check the filter after cleaning and before each drying cycle to help maintain airflow.

Installation Tips

• Remove the existing lint filter and compare its shape and approximate dimensions with this replacement.
• Install the replacement in the same filter slot and confirm that it seats and locks securely.
• Use the included bendable brush to remove lint from the filter slot and surrounding vent area.
• Clean the mesh regularly and allow it to dry before reinstalling if washed.
• No special tools are normally required for this filter replacement.