Accessories Kit for Shark IQ AV1010AE R101AE RV1001AE AV911 Vacuum - 1 main brush, 6 side brushes, 4 Filter Kit, 1 Pre-Motor Foam, Cleaning Tool
0.00
Regular price
$24.69
Regular price
Save 16%
$29.38
Sale price
$24.69
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
Shark IQ Accessories Kit (1 Main Brush 6 Side Brushes 4 Filter Kit 1 Pre-Motor Foam + Cleaning Tool)
Key Features
- Complete 13-piece replacement kit for robotic vacuums.
- Package includes: 1 main brush, 6 side brushes, 2 HEPA-style filters, 1 pre-filter screen, 1 felt filter, 1 foam filter, and 1 cleaning tool.
- Main brush features a V-shaped bristle pattern designed to minimize hair tangles and lift debris from carpets and hard floors.
- Side brushes are designed to sweep debris from edges and corners into the main cleaning path.
- Multi-stage filtration system captures dust, pet dander, and other fine particles.
- Components are designed for a direct, tool-free replacement of original parts.
Replaces / Cross-Reference Part Numbers
- Main Brush: RVSBK950
- Side Brushes: 102KY1000
- Filter Kit (HEPA-style, Foam, Felt): RVFFK950, 1172FK870, XFRV2000WD
Compatibility & Fitment
- Shark IQ Robot Models: R101AE (RV1001AE), RV1001, RV1000, AV1010AE, AV1002AE, AV911S, AV970, AV993
- Shark AI Robot Models: AV2501S, AV2501AE
- Shark EZ Robot Models: RV912S, RV913S
- Always verify your vacuum's model number before purchase to ensure proper fit.
When to Replace
- Filters (Foam, Felt, HEPA-style): Every 2-3 months to maintain suction and filtration performance.
- Side Brushes: Every 3-6 months, or sooner if bristles are bent, broken, or visibly worn.
- Main Brush: Every 6-12 months, depending on usage and the amount of debris collected.
- Replacement frequency may vary based on your home environment, such as the presence of pets or high dust levels.
Installation Tips
- Ensure the robot vacuum is powered off before replacing any parts.
- Remove the old components by following the instructions in your vacuum's user manual.
- The side brushes and filters snap into place for simple installation.
- To replace the main brush, release the tabs on the brush guard, lift it out, and insert the new brush.
- After installation, run the vacuum briefly to confirm all parts are seated correctly and functioning properly.
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
