[Lifetime Warranty] Replacement Parts Kit for ILIFE V3 V3s V5 V5s V5s Pro Robot Vacuum Cleaner | 1 Primary Filter, 3 HEPA Filter, 6 Side Brushes

Replacement Parts Kit for ILIFE V3, V3s, V5, V5s, V5s Pro

Key Features

• Comprehensive 10-piece maintenance kit including 1 primary mesh filter, 3 high-efficiency particulate filters, and 6 side-sweeping brushes.
• High-efficiency filters designed to capture microscopic dust, pet dander, and airborne particles down to 0.3 microns.
• Nylon-bristle side brushes engineered for high-speed rotation to sweep debris from corners and edges into the central suction port.
• Primary mesh filter acts as a first stage of defense, trapping hair and large debris to extend the life of the internal fine-particle filters.
• Durable, impact-resistant plastic housings ensure a precise fit and maintain consistent airflow during operation.

Replaces / Cross-Reference Part Numbers

• PX-F010 (HEPA Filter)
• PX-S001 (Side Brushes)
• PX-F020 (Primary Filter)
  

Compatibility & Fitment

• ILIFE V3 / V3s / V3s Pro
• ILIFE V5 / V5s / V5s Pro
• ILIFE V50 / V55
• Zaco V3 / V4 / V5 / V5s Pro

When to Replace

• High-Efficiency Filters: Replace every 1–2 months to prevent suction loss and maintain air quality.
• Side Brushes: Replace every 3–6 months or when bristles are permanently deformed, frayed, or missing.
• Primary Filter: Replace every 6–12 months or if the mesh becomes torn or cannot be cleaned with water.
• Maintenance Tip: Tap the filters against a trash bin weekly to remove loose dust and increase part longevity.

Installation Tips

• Filter Installation: Remove the dustbin from the rear of the vacuum. Open the bin lid, remove the primary mesh filter, and then swap the high-efficiency filter located beneath it. Ensure the white side of the filter faces upward.
• Primary Filter Care: The primary mesh filter is washable; ensure it is completely dry (at least 24 hours) before reinstalling it to avoid motor damage.
• Side Brush Attachment: These brushes are snap-on. Pull the old brush straight up to remove. Align the square hole of the new brush with the motor post and press down firmly until it clicks.
• Rotation Check: After installing side brushes, manually rotate them to ensure they move freely without mechanical resistance from the brush motor.