791988 Deck Belt | Fits 52" Deck Hustler Raptor, Raptor SD Zero Turn Mowers & More | Aramid Cord | 140.75"
0.00
Regular price
$33.39
Regular price
Save 10%
$37.09
Sale price
$33.39
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
791988 Deck Belt | 140.75"
Key Features
- Type: Aftermarket Mower Deck Belt
- Construction: Aramid fiber cord for enhanced durability and strength
- Width: 5/8 inch
- Outer Circumference: 140-3/4 inches
- Profile: V-Belt
Replaces / Cross-Reference Part Numbers
- 265-336
- 810-CBL2254T
- 15190
- B1791988
Compatibility & Fitment
- Brand: Hustler
- Model Series: Raptor
- Deck Size: 52 inches
- Fits Specific Models: 931899, 932004US, 933077, 934414, 934513US, 934794, 934802, 935759
When to Replace
- Visible signs of wear such as cracking, fraying, glazing, or separation.
- Noticeable loss of tension, causing belt slippage.
- Decreased cutting performance or unevenly cut grass.
- Audible squealing from the deck during operation.
Installation Tips
- Always consult your mower's operator manual for specific replacement procedures.
- Disconnect the spark plug wire before performing any maintenance for safety.
- Photograph the existing belt routing before removal to ensure correct installation.
- Verify proper belt tension after installation to prevent slippage and premature wear.
-
PART NUMBERS
This Deck Belt replaces part This Deck Belt replaces part number: Hustler #791988 -
SAVING SOLUTION
Enjoy the great feeling when your mower is repaired and works like before - BlueStars brings DIY solutions to help you deal with any trouble -
FIX MOWER'S SYMPTOMS
Uneven Grass Cutting, Loud or Unusual Noises, Excessive Vibration, Burning Smell, Slipping or Stalling Blades -
IMPORTANT NOTE
This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility.
CHECK BEFORE INSTALLING
Pulley Bearings: Make sure they spin freely, as damaged bearings can increase friction and wear | Pulleys Edges: Rust or sharp edges can cause belt damage | Pulley Grooves: Clean debris from the pulley grooves | Tensioner Spring: A weak spring can lead to belt slippage and increased friction
4 SIMPLE STEPS
1. Remove key & disconnect spark plug wire(s) to prevent start; let engine cool | 2. Raise & secure deck, remove belt covers | 3. Release tension, remove old belt (note/take photos of routing) | 4. Install new belt, rotate blades/spindle to check alignment & operation.
FOR 52-INCH CUTTING DECK
Hustler Raptor & Raptor Limited 52" 931899, 932004US, 933077, 934414, 934513US, 934794, 934802, 934893, 935759, 936492, 936500, 937771, 937862, 935817, 937755, 937763, 937813, 937854 Zero-Turn Mowers | Hustler Raptor EX 52" 931899EX Zero-Turn Mowers | Hustler Raptor 52" 117164, 117164EX, 124379, 124379EX Zero Turn Mowers
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
