7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium

0.00 Regular price
$17.59
Regular price Save 11% $19.70 Sale price
$17.59
In stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club

CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

7082265 Engine Air Filter for Polaris Ranger 1000 & XP 1000

Key Features

  • Replacement engine air filter with vehicle-specific fitment.
  • Designed for Polaris Ranger 1000 and XP 1000 applications from 2018 through 2026.
  • High-density paper pleats provide filtration surface area for trapping dust and debris.
  • Rubber sealing end caps support an airtight fit in the airbox.
  • Inner and outer steel mesh supports the filter media and helps maintain its shape.

Replaces / Cross-Reference Part Numbers

  • 7082265
  • 519-CAR2232F
  • SL83286

Compatibility & Fitment

Fits Polaris Ranger 1000 and XP 1000 vehicles equipped with ProStar 1000 SOHC or DOHC 999 cc engines, including Crew, NorthStar, Trail Boss, Texas, High Lifter, and Premium editions from model years 2018–2026. This filter does not fit Diesel models. Verify the original filter's dimensions and part number before ordering, especially when replacing a filter on a modified or specialty vehicle.

When to Replace

Replace the engine air filter at the recommended service interval of every 100–200 operating hours, 1,000–2,000 miles, or 12 months, depending on use and operating conditions. Dusty or dirty environments can require more frequent service.

A restricted or contaminated filter may contribute to hard starting, black smoke, reduced power, poor throttle response, and lower fuel efficiency. Replace the filter if the media is heavily loaded with dust, damaged, wet, or no longer sealing correctly.

Installation Tips

  • Confirm the replacement part number and compare the new filter with the original before installation.
  • Switch off the vehicle and allow the engine and intake components to cool.
  • Clean loose dirt from around the airbox before opening it so debris does not enter the intake.
  • Remove the old filter, inspect the airbox and sealing surfaces, and clean them without pushing debris into the intake.
  • Install the new filter evenly, ensuring the rubber end caps seat fully and the airbox closes securely.
  • Do not operate the engine with the air filter removed. Installation normally requires basic hand tools and can be completed during routine air-filter service.
7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 1
7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 2
7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 3
7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 4
  • 7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 1

    FIX ENGINE'S SYMPTOMS

    Black Smoke from Exhaust | Hard Starts & Engine Stalling | Increased Fuel Consumption | Loss of Horsepower & Acceleration
  • 7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 2

    MAINTENANCE TIP

    For optimal engine performance, air filters should be replaced at recommended intervals: every 100-200 hours, 1,000-2,000 miles, or 12 months.
  • 7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 3

    SAVING SOLUTION

    Enjoy the comfort that our small yet mighty parts simplify your gardening experience - BlueStars brings DIY solutions to help deal with any trouble!
  • 7082265 Air Filter for Polaris Ranger 1000 & XP 1000 (2018-2026) - Fits Ranger Crew XP 1000 NorthStar Premium 4

    IMPORTANT NOTE

    This is a replacement part designed to be compatible with certain engines. Any brand names mentioned are used solely to indicate compatibility.
LEAVE THE BREATHING TO YOUR ENGINE

LEAVE THE BREATHING TO YOUR ENGINE

Enjoy your seamless experience with the support of our replacement parts!

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

Replaces Part Numbers
7082265, 7083113, R-1000-AF, 12513
Engine Specifications
Designed specifically for Polaris ProStar 1000 Engines (999cc). Compatible with both SOHC and DOHC engine variants
Important Notes
1. NOT for Polaris Ranger Diesel models.
2. NOT for Ranger 900 or Ranger 570 models (Please check your manual or old filter part number).

FAQs

This replacement engine air filter fits Polaris Ranger 1000 and Ranger XP 1000 models from 2018 through 2026, including Ranger Crew XP 1000, NorthStar, and Premium configurations. Verify that your vehicle uses the 7082265 or 7083113 filter before ordering.
The filter is identified by Polaris part number 7082265 and replaces part number 7083113.
Common signs include reduced engine performance, sluggish acceleration, increased fuel consumption, uneven running, or difficulty reaching normal operating speed. In dusty conditions, a heavily loaded filter can also contribute to increased intake restriction.
Air filter replacement is generally a straightforward maintenance job that can be completed in about 10 to 20 minutes. In most Ranger configurations, no specialized tools are required; remove the airbox cover, take out the old filter, clean loose debris from the housing, and seat the replacement filter evenly before reinstalling the cover.
Inspect the airbox, sealing surface, intake tube, and filter housing for dust, moisture, cracks, or debris. Clean the housing without allowing dirt to enter the intake, and make sure the new filter is fully seated around the sealing edge. Frequent operation in dust, sand, or wet conditions may require more frequent inspection and replacement.