[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38"
0.00
Regular price
$7.69
Regular price
Save 11%
$8.61
Sale price
$7.69
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
532196853 Drive Belt for Walk-Behind Mowers
Key Features
- Drive belt for transferring engine power to the mower pulleys and helping propel the mower forward or backward.
- Aramid cord construction with a covered belt design.
- Outer length: 32.38 inches.
- Top width: 3/8 inch; bottom width: 0.222 inch; height: 0.22 inch.
- Fabric-wrapped construction supports grip and stable power transmission during operation.
Replaces / Cross-Reference Part Numbers
- 532196853
- 196853
- 426609
- 532426609
- 583432701
Compatibility & Fitment
Compatible with selected Husqvarna, Craftsman, Poulan, Poulan Pro, Jonsered, Dixon, and MTD walk-behind mower models. Confirm the belt dimensions and your mower model before ordering.
- Husqvarna: 5521 CHV (961430001-03, 961430001-04, 961430001-05), 65021 CHV (961430019-00), HU550F, HU550FH, HU725F, HU725FH, LB155S, J55SL (961210018-07, 961210018-08)
- Craftsman: 700 Series Platinum, 917.375452, 917.377550, 944.362080
- Poulan / Poulan Pro: PR625P, PR625Y22RHP, PR625Y22RP, PR675Y22RHP, PR675Y22RHPE, PR725Y22RHP, 961420116-01, 961420116-02, 961420116-03, 961420117-01, 961420117-02, 961480049-00, 961480049-01, 961480050-00, 961490002-01, 961490002-02, 961420133-00
- Jonsered: LM2153CMDAW, LM2156CMDA, LM2155MD (961210019-05, 961210019-06, 961210036-00), J160FH22
- Dixon: D149F22
- MTD: 25B-551A729
The model list is not exhaustive. Use the mower model and belt measurements to verify fitment.
When to Replace
Replace the drive belt when it no longer transfers power reliably or shows visible damage. Common replacement signs include:
- Cracks or significant wear
- A rolled or turned-over belt
- Damage along the side wall
- A burned, glazed, or shiny side wall
- Reduced drive engagement, slipping, or inconsistent mower movement
Restricted pulleys, incorrect belt routing, or worn pulley components can also cause premature belt wear. Inspect the complete drive system when installing a new belt.
Installation Tips
- Stop the engine, disconnect the spark-plug wire, and allow the mower to cool before servicing the belt.
- Block or position the mower securely according to the equipment manufacturer’s service procedure.
- Photograph or note the original belt routing before removal.
- Inspect the pulleys, belt guides, and tensioning components for debris, sharp edges, looseness, or wear.
- Install the belt in the original routing without twisting it, then confirm that it sits correctly in each pulley groove.
- Rotate the drive system by hand, where safe and practical, to verify alignment before reconnecting the spark-plug wire.
- Allow approximately 30–60 minutes for installation, depending on mower design and access to the drive system.
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 1](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_1.jpg?v=1785746888)
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 2](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_2.jpg?v=1785746895)
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 3](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_3.jpg?v=1785812348)
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 4](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_4.jpg?v=1785812354)
-
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 1](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_9.jpg?v=1786341072)
PART NUMBERS
This Drive Belt replaces: Husqvarna 532196853, 196853, 583432701, 590000501; Craftsman 426609, 532426609; Poulan 532426609 -
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 2](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_10.jpg?v=1786341075)
SAVING SOLUTION
Enjoy the great feeling when your mower is repaired and works like before - BlueStars brings DIY solutions to help you deal with any trouble -
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 3](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_5.jpg?v=1785746907)
FIX MOWER'S SYMPTOMS
Slipping or Inconsistent Speed, Loud or Unusual Noises, Excessive Vibration, Burning Smell, Moves slowly or Fails to move -
![[Grip120] 532196853 Drive Belt | For Husqvarna Poulan Jonsered Dixon Walk-Behind Mowers | Replaces 196853 426609 532426609 | Aramid Cord | 32.38" 4](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ00216421_aplus_6.jpg?v=1785746910)
IMPORTANT NOTE
This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility.
CHECK BEFORE INSTALLING
- Pulley Bearings: Make sure they spin freely, as damaged bearings can increase friction and wear
- Pulleys Edges: Rust or sharp edges can cause belt damage
- Pulley Grooves: Clean debris from the pulley grooves
- Tensioner Spring: A weak spring can lead to belt slippage and increased friction
- Pulleys Edges: Rust or sharp edges can cause belt damage
- Pulley Grooves: Clean debris from the pulley grooves
- Tensioner Spring: A weak spring can lead to belt slippage and increased friction
4 SIMPLE STEPS
- Remove the ignition key and spark plug wire(s). Let the engine cool.
- Remove the mower deck.
- Release the old drive belt from the pulleys. (Take a photo of the belt routing first.)
- Install the new belt and check for proper operation.
- Remove the mower deck.
- Release the old drive belt from the pulleys. (Take a photo of the belt routing first.)
- Install the new belt and check for proper operation.
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
