[Lifetime Warranty] 490-241-0038 Universal Rolling Skid Shoes with Hardware - Compatible with MTD Craftsman Troy-Bilt Cub Cadet Ariens 2-Stage & 3-Stage Snow Blower (2-3/4" Slot, 3" Bolt Centers)
Universal snow blower rolling skid shoes kit with wheels, mounting hardware, and installation example.
Universal snow blower rolling skid shoes, wheels, and mounting hardware kit components.
Dimensional diagram of 490-241-0038 universal snow blower rolling skid shoe showing width and slot measurements.
Close-up of 490-241-0038 universal snow blower rolling skid shoe showing high-density polyurethane construction.
Informational graphic for 490-241-0038 universal snow blower skid shoes showing symptoms of worn parts.
Two universal snow blower rolling skid shoes with mounting hardware shown from top and bottom angles.
Two black universal snow blower rolling skid shoes shown from top and bottom angles.
Close-up of a universal snow blower rolling skid shoe with mounting hardware and performance benefit text overlay.
Universal snow blower rolling skid shoe installed on a red snow blower housing with installation instructions.
Universal snow blower rolling skid shoes kit with wheels, mounting hardware, and installation example.
Universal snow blower rolling skid shoes, wheels, and mounting hardware kit components.
Dimensional diagram of 490-241-0038 universal snow blower rolling skid shoe showing width and slot measurements.
Close-up of 490-241-0038 universal snow blower rolling skid shoe showing high-density polyurethane construction.
Informational graphic for 490-241-0038 universal snow blower skid shoes showing symptoms of worn parts.
Two universal snow blower rolling skid shoes with mounting hardware shown from top and bottom angles.
Two black universal snow blower rolling skid shoes shown from top and bottom angles.
Close-up of a universal snow blower rolling skid shoe with mounting hardware and performance benefit text overlay.
Universal snow blower rolling skid shoe installed on a red snow blower housing with installation instructions.
Lifetime Warranty

[Lifetime Warranty] 490-241-0038 Universal Rolling Skid Shoes with Hardware - Compatible with MTD Craftsman Troy-Bilt Cub Cadet Ariens 2-Stage & 3-Stage Snow Blower (2-3/4" Slot, 3" Bolt Centers)

Save 13%
0.00
$31.73
$36.49
$31.73
Out of stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

490-241-0038 Universal Snow Blower Rolling Skid Shoes with Hardware

Key Features

  • Universal design with reversible, non-marring skid shoes.
  • Constructed from a durable, heavy-duty composite material that resists rust and wear.
  • Rolling design reduces friction for easier maneuverability and prevents scratching on concrete, asphalt, and paved surfaces.
  • Includes all necessary mounting hardware (bolts, nuts, washers).

Replaces / Cross-Reference Part Numbers

  • 490-241-0038

Compatibility & Fitment

  • Fits most 2-stage and 3-stage snow blowers.
  • Designed for machines with 2-3/4 inch and 3 inch bolt hole centers.
  • Compatible with brands including MTD, Craftsman, Troy-Bilt, Cub Cadet, and Yard Machines.

When to Replace

  • Existing skid shoes are worn, cracked, broken, or missing.
  • The scraper bar or auger housing makes direct contact with the ground.
  • To upgrade from standard metal shoes to protect delicate or decorative surfaces.

Installation Tips

  • Position the snow blower on a level surface and turn off the engine. Disconnect the spark plug wire as a safety precaution.
  • Remove the old skid shoes and hardware.
  • Attach the new rolling skid shoes using the included hardware. Do not fully tighten yet.
  • Adjust the height of the skid shoes to set the desired clearance between the scraper bar and the ground. A common starting point is 1/8 inch for smooth surfaces.
  • Ensure both shoes are set to the same height, then securely tighten all hardware.
Product image 1
Product image 2
Product image
  • PERFECT FIT

    PERFECT FIT

    Fits for MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, MTD Pro of 2 Stage & 3 Stage Snow Thrower
  • PREMIUM MATERIAL

    PREMIUM MATERIAL

    Made of high-quality Polyurethane material, which is durable in cold temperatures down to 30 degrees below zero and wear-resistant
  • SAVING SOLUTION

    SAVING SOLUTION

    Enjoy the great feeling when your dryer is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble.
  • SIMPLE INSTALLATION

    SIMPLE INSTALLATION

    Just 15 minutes of replacing to make the snowblowers run like new!
CONQUERED WINTER WITH EASE

CONQUERED WINTER WITH EASE

Simplify Snow Removal with Our Skid Shoes!
Brand Model Number
Fits for MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, MTD Pro of 2 Stage & 3 Stage Snow Thrower Snow Blower.
Fits machines with 2-3/4" and 3" bolt centers.
Compatible with models 31AH64EG700, 31AH64FG700, 31AH65FH700, 31AM63FF752, 31AS63EE700, 31AS63EF700, 31AS63EF729, 31AH64FG795, MP28 (31AH64FG795), 31AH65FH783, 31AS63EE783, RM2410 (31AS63EE783), RM2610 (31AM63FF783), RM2860 (31AH66FG783), RM3060 (31AH65FH783), 31AS63EE731.

FAQ

Part 490-241-0038 is designed to fit many two-stage and three-stage snow throwers that use skid shoes with 2-3/4 inch or 3 inch bolt-center spacing. Based on the available references, it is commonly used with equipment from Cub Cadet, MTD, Troy-Bilt, and Craftsman. Because fit depends on the skid shoe mounting hole spacing on your auger housing, verify your machine's bolt centers before ordering.
The confirmed part number for this rolling skid shoe kit is 490-241-0038. If you are matching an existing set, use that number and also confirm the mounting pattern on your snow blower, since universal-style skid shoes are selected by both part number and bolt spacing.
Unlike standard fixed skid shoes that slide and scrape across the ground, rolling skid shoes are designed to roll over pavement and concrete. This can help reduce dragging, make the machine easier to maneuver on hard surfaces, and lessen surface scuffing compared with conventional skid shoes.
Common signs include the housing scraping the driveway, uneven auger housing height, excessive wear on the existing skid shoes, difficulty keeping the scraper bar off the ground, or the machine catching on cracks and expansion joints. If the old shoes are worn thin or no longer adjust evenly side to side, replacement is a good idea.
Installation is usually straightforward. On most machines, you support the auger housing at the desired height, remove the old skid shoes, bolt on the new set, and adjust both sides evenly. Basic hand tools such as wrenches or a socket set are typically all that is needed. For most homeowners, the job often takes about 15 to 30 minutes.
Before installation, check the bolt-center spacing to confirm fit, inspect the scraper bar for wear, and make sure the mounting holes on the auger housing are not bent or elongated. It is also a good time to set skid shoe height for your surface: slightly higher for gravel or uneven surfaces, and lower for smooth pavement or concrete.