119367 Reusable Coffee Keurig Filter Replacement for Keurig K Cups 2.0 Series - 2 Pack
0.00
Regular price
$29.91
Regular price
Save 13%
$34.40
Sale price
$29.91
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
119367 Reusable Coffee Filter
Key Features
- Eco-Friendly Design: Reusable alternative to single-use plastic pods, reducing waste and allowing for the use of any brand of ground coffee.
- Precision Mesh Filtration: Features a high-grade stainless steel micro-mesh screen that allows for optimal flavor extraction while keeping sediment out of your cup.
- Keurig 2.0 Recognition: Specifically engineered with the necessary identification markings to be recognized by Keurig 2.0 sensor systems.
- Integrated Silicone Seal: The lid is equipped with a heat-resistant silicone O-ring to prevent leaks and ensure all water passes through the coffee grounds.
- Durable Construction: Made from BPA-free, food-grade plastic designed to withstand high-pressure brewing cycles without warping.
Replaces / Cross-Reference Part Numbers
- 119367
- Keurig My K-Cup Universal Filter
Compatibility & Fitment
This reusable filter is designed for use in Keurig 2.0 and select Plus series brewers. Compatible models include:
- K-Series 2.0: K200, K225, K250, K300, K325, K350, K360, K400, K425, K450, K460, K475, K500, K525, K550, K560, K575.
- Plus Series: K-Select, K-Elite, K-Classic (with updated needle assemblies), K-Latte.
- Note: On many 2.0 machines, you must remove the standard K-Cup holder (Part # 5000054082) from the brewer to insert this universal filter assembly.
When to Replace
- Mesh Tearing: Visible holes or separation in the stainless steel mesh, which allows coffee grounds to enter your mug.
- Seal Failure: The lid no longer snaps shut or the silicone gasket is missing, causing water to bypass the coffee.
- Clogged Screen: Persistent slow brewing or "Short Cup" errors caused by fine oils and micro-sediment that cannot be removed by cleaning.
- Cracked Housing: The plastic frame shows signs of heat stress or cracking, which can lead to structural failure under pressure.
Installation Tips
- Grind Size: Use a medium-to-coarse grind; excessively fine "espresso" grinds can clog the mesh and cause the brewer to overflow.
- Fill Level: Do not fill the filter past the "MAX" line. Overfilling prevents the lid from sealing and can lead to a messy cleanup.
- Brewer Preparation: For Keurig 2.0 models, grasp the K-Cup pod holder and pull it toward you to remove it. Insert the reusable filter directly into the vacated slot.
- Alignment: Ensure the arrow on the filter lid aligns with the center of the brewer’s puncture needle to avoid damage.
- Cleaning: Rinse the filter immediately after use. It is top-rack dishwasher safe, but hand-washing extends the life of the mesh and seals.
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
