[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump
0.00
Regular price
$13.28
Regular price
Save 11%
$14.87
Sale price
$13.28
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
161-193 uF/MFD 125 VAC ±20% 50/60 Hz CD60 Round Motor Well Pump Start Capacitor
Key Features
- Model: CD60
- Capacitance: 161-193 µF (Microfarad)
- Voltage Rating: 110-125 VAC
- Frequency: 50/60 Hz
- Capacitance Tolerance: ±20%
- Shape: Round
- Case Material: Plastic, moisture and heat resistant
- Dielectric Material: Metallized polypropylene film
- Terminals: 1/4 inch standard male terminals
Replaces / Cross-Reference Part Numbers
- This is a universal replacement for start capacitors with matching specifications. Verify that your original capacitor's capacitance range (µF/MFD) and voltage rating (VAC) fall within the values of this component.
Compatibility & Fitment
- Designed for single-phase AC electric motor starting applications.
- Commonly used in well pumps, pool pumps, HVAC units, air compressors, and refrigeration systems.
- Compatible with specific pump models, including:
- Hayward Super Pump (110V and 220V motors)
- Hayward Max-Flo (0.75 HP, 1.0 HP, 1.5 HP models)
When to Replace
- Motor hums but struggles or fails to start.
- Start-up is slow or requires manual assistance.
- The original capacitor shows physical signs of failure, such as bulging, cracking, or leaking fluid.
- Capacitance measures outside the specified ±20% tolerance range when tested with a multimeter.
Installation Tips
- Disconnect all electrical power to the motor before beginning installation.
- Safely discharge the existing capacitor by shorting the terminals with an insulated screwdriver.
- Confirm the µF/MFD and VAC ratings of the new capacitor match the specifications of the original part.
- Note the orientation of the wire connections before removing the old capacitor.
- Ensure all electrical connections are clean and secure.
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 1](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_5.jpg?v=1786351924)
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 2](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_6.jpg?v=1786351925)
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 3](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_9.jpg?v=1786351924)
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 4](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_7.jpg?v=1786351924)
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 5](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_8.jpg?v=1786351924)
-
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 1](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_1.jpg?v=1786351924)
Perfect fit
Universal fit with any brands with the same ratings -
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 2](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_2.jpg?v=1786351924)
Premium quality
This product adopts a high-quality metalized polypropylene film that provides stable and durable performance -
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 3](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_3.jpg?v=1786351925)
Saving solution
Enjoy the great feeling when your engine is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble -
![[Upgraded] 161-193 uF MFD 110-125 VAC ±20% 50/60 Hz CD60 Round Motor Start Capacitor - Fits Pool Pump, Well Pump 4](https://cdn.shopify.com/s/files/1/2576/7548/files/AZ10427614_aplus_4.jpg?v=1786351925)
Simple installation
Because the capacitor is a relatively simple part, the installation just takes a few minutes and will save you at least a hundred bucks in labor
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
