WPW10181986 Range Oven Sensor Probe for Whirlpool Maytag Kenmore Ranges
0.00
Regular price
$22.40
Regular price
Save 11%
$25.09
Sale price
$22.40
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
WPW10181986 / W10181986 / W10131826 Range Oven Sensor Probe Replacement
Key Features
- Accurately monitors and regulates internal oven temperature for consistent heat distribution.
- Constructed with high-grade stainless steel for corrosion resistance and thermal stability.
- Includes standardized plastic wire harness connector for secure electrical termination.
- Calibrated to provide precise resistance readings (approximately 1080-1100 ohms at room temperature) to the main control board.
Replaces / Cross-Reference Part Numbers
- AP6016450
- PS11749737
- W10181986
- W10131826
- 8273902
- 1394200
- WPW10181986VP
- EAP11749737
- PD00002916
- ER10181986
Compatibility & Fitment
- Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Estate, Jenn-Air, and Roper ranges and ovens.
- Fits various freestanding ranges, built-in wall ovens, and slide-in oven models.
- Engineered for use in both electric and gas-powered cooking appliances.
When to Replace
- Oven displays temperature-related error codes such as F3, F3-E1, F3-E2, or F4.
- Oven fails to reach the set temperature or significantly overshoots the target heat.
- Food is consistently undercooked or burnt despite correct settings.
- Resistance testing with a multimeter shows an open circuit or values outside the standard 1100-ohm range.
- The metal probe shows visible signs of warping, corrosion, or physical damage.
Installation Tips
- Disconnect the power supply to the range or oven before starting the repair.
- Access the sensor from either the interior back wall of the oven or by removing the rear access panel.
- Remove the mounting screws (typically 1/4 inch hex head) securing the probe to the oven cavity.
- Carefully pull the wire harness through the hole; if the connector is not accessible, you may need to remove the back panel.
- Unplug the old connector and snap the new sensor harness into place.
- Re-insert the probe and tighten the mounting screws until the unit is flush against the wall.
-
PERFECT FIT
BlueStars W10181986 Range Oven Sensor Probe replaces part numbers: 8273902, AP6016450, W10131826, WPW10181986, WPW10181986VP, PS11749737. -
PREMIUM QUALITY
W10181986 Range Oven Sensor Probe is made from high-quality material that ensure long-lasting and effective operation. -
SAVING SOLUTION
Enjoy the great feeling when your oven works properly like before - BlueStars brings DIY solutions to help you deal with any trouble. -
SIMPLE INSTALLATION
The W10181986 Range Oven Sensor Probe is very easy to install and anyone with basic hand tools can install it.
EASY INSTALLATION
Only need a #2 square head screwdriver or a #2 Philips screwdriver to install. Remember to unplug the range before installing the part
PREMIUM QUALITY
This oven sensor is manufactured from high-grade plastic & metal that ensure high durability and promote efficiency
ECONOMICAL DIY REPAIR
Enjoy the comfort that our sensor probe brings into your oven - BlueStars provides DIY solutions to help you deal with any troubles
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
Material
Metal
Resistance at Room Temp
1000 Ohms (nominal) / 1080–1090 Ohms (tested)
Probe Dimensions
7 x 1-3/4 x 3/4 inches
Harness Length
6 inches
Includes
1× Sensor Probe + 2-Wire Harness Assembly
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
