279838 Dryer Heating Element Kit For Whirlpool WED4815EW1 WED5000DW2
0.00
Regular price
$37.69
Regular price
Save 17%
$45.22
Sale price
$37.69
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
279838 Dryer Heating Element & Thermal Fuse Restoration Kit
- Full Kit Set: 1 x 279838 Dryer Heating Element, 1 x 3392519 Thermal Fuse, 1 x 3977393 Thermal Cut-off Fuse, 1 x 3387134 Cycling Thermostat, 1 x 3977767 Thermostat with Screws
- Complete kit to restore dryer heating function.
- Heating Element Rating: 5400 Watts, 250 Volts.
- Features a 5/16-inch male terminal connection.
- Nickel-chromium alloy coil construction for consistent heat generation.
Replaces / Cross-Reference Part Numbers
- Heating Element: 279838, 279837, 3398064, 3403585, 8565582, W10724237, AP3094254
- Thermal Fuse: 3392519, 3388651, 694511, 80005, WP3392519VP, ET401
- Thermal Cut-off: 3977393, 279816, 3399848, AP3094244
- Cycling Thermostat: 3387134, 306910, 3387135, 3387139, WP3387134VP
Compatibility & Fitment
- Fits numerous electric dryer models from brands including Whirlpool, Kenmore, Maytag, Amana, Roper, and Crosley.
- Direct fit for models specified in the product title, such as WED4815EW1, WED5000DW2, and WED6200SW1.
- Designed for many 29-inch wide dryers with the lint screen located on the top panel.
When to Replace
- Dryer tumbles but does not produce heat.
- Clothing is still damp after a full drying cycle.
- Dryer overheats or shuts off mid-cycle.
- Dryer will not start (symptom of a failed thermal fuse).
- Visible breaks or damage to the old heating element coil.
Installation Tips
- Disconnect the dryer from the electrical power source before beginning service.
- Use a multimeter to test for continuity to diagnose failed components.
- For optimal performance and safety, replace all included kit components at the same time.
- Thoroughly clean lint from the dryer's exhaust vent and housing during installation to prevent future overheating.
- Photograph the wiring configuration before disconnecting old parts to ensure correct reassembly.
INSTALLATION - 4 SIMPLE STEPS
1. Locate the heating element behind the dryer back panel.
2. Remove the wires going to the heating element and other parts.
3. Unscrew two mounting screws to pull the heating element off of the heater box. Unscrew mounting screws to release all other old parts.
4. Make sure to clean the dryer vent and blower housing. Reinstall with our new parts!
(Note: Do not let the Ni-Cr heating wire touch the housing when installing. Make sure the connection wire of the thermostat is not loose)
2. Remove the wires going to the heating element and other parts.
3. Unscrew two mounting screws to pull the heating element off of the heater box. Unscrew mounting screws to release all other old parts.
4. Make sure to clean the dryer vent and blower housing. Reinstall with our new parts!
(Note: Do not let the Ni-Cr heating wire touch the housing when installing. Make sure the connection wire of the thermostat is not loose)
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
