DG32-00002B EBG61305805 Range Oven Temperature Sensor Probe for Samsung & LG Oven
0.00
Regular price
$20.99
Regular price
Save 11%
$23.51
Sale price
$20.99
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
DG32-00002B / EBG61305805 Range Oven Temperature Sensor Probe
Key Features
- Thermistor-based technology accurately monitors internal oven temperatures to ensure consistent thermal regulation.
- High-grade stainless steel probe construction provides resistance to corrosion and thermal degradation.
- Equipped with a standardized plastic connector for a secure and reliable electrical interface with the control board.
- Engineered to provide precise resistance readings (approximately 1080-1100 ohms at room temperature) for optimized heat calibration.
Replaces / Cross-Reference Part Numbers
- AP4343210
- PS4240743
- DG32-00002A
- EBG61305805
- 6322B62214A
- 2087461
- PS11732697
- EAP2567734
- PS2567734
- 4210332
Compatibility & Fitment
- Compatible with Samsung and LG gas and electric ranges and ovens.
- Fits various freestanding ranges, built-in wall ovens, and slide-in models.
- Designed for use in convection, radiant, and thermal cooking systems.
When to Replace
- Oven control panel displays temperature-related error codes such as F3, F-3, or E-01.
- Oven fails to heat to the selected temperature or significantly overshoots the target setting.
- Baked goods are consistently undercooked or burnt despite following recipe instructions.
- The oven remains stuck in the "preheating" phase indefinitely.
- A multimeter test shows the sensor has no continuity or resistance values significantly outside the 1100-ohm range at 75°F.
Installation Tips
- Disconnect the power to the range by unplugging the unit or switching off the circuit breaker before beginning service.
- Remove the oven racks to gain clear access to the rear wall of the oven cavity.
- Use a Phillips head screwdriver or a 1/4-inch nut driver to remove the mounting screws securing the probe.
- Gently pull the sensor forward to reveal the wire harness connector; if the connector is not accessible, the rear access panel of the range must be removed.
- Disconnect the old sensor and snap the new connector firmly into place.
- Re-insert the wires and the probe into the mounting hole, ensuring the probe is straight before tightening the screws.
-
FIX RANGE SYMPTOMS
Oven temperature unpredictable or uncontrollable | No heat or Too hot | Not correspond to the LED readout temp | Error code displayed C-20 -
PREMIUM QUALITY
BlueStars DG32-00002B Temperature Sensor is made of high-grade materials ensuring long-lasting operation. -
SAVING SOLUTION
Great feeling when your oven is repaired and works efficiently - BlueStars brings DIY solutions to help you deal with any trouble. -
SIMPLE INSTALLATION
You will need these tools in advance: 1 x small flat-blade screwdriver; 2 x Phillips screwdriver; 1 x locking pliers; 1 x needle nose pliers.
IDEAL DESIGN
Well-designed with 304 stainless steel and sturdy braided wire material to withstand extreme heat (Range of -50 to +300°)
PRECISE TEMP CONTROL
The sensitive thermistor sensor chip will allow for precise temperature control, allowing you to set and maintain the desired temperature.
ENJOY YOUR LIFE WITH OUR PART INSIDE!
BlueStars - #1 source of high-quality replacement parts
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
Sensor Type
Platinum RTD (Class B PT1000)
Temperature Range
-50°C to +300°C
Material
Stainless steel with plastic plug
Color
Gray / White
Probe Length
100 mm (approx. 3.9")
Cable Length
82 mm (approx. 3.2")
Support Bracket Width
1-3/4" (approx. 1.7")
Product Dimensions
3-7/8"L x 1-3/4"W x 3/4"H
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
