GE Brand [Lifetime Warranty] WB26X10038 Microwave Turntable Motor Replacement - Compatible with GE & Kenmore Microwaves - Replaces 5304408980 WB26X10038 AP2024962 PS237772
WB26X10038 microwave turntable motor replacement with metal housing and two-pin electrical connector.
WB26X10038 microwave turntable motor showing dimensions and compatibility information.
Stainless steel microwave showing common repair symptoms like noisy operation or a non-rotating turntable.
WB26X10038 microwave turntable motor showing metal construction and technical specifications label.
Close-up of WB26X10038 microwave turntable motor showing 49TYZ synchronous motor specifications and D-shaped drive shaft.
Woman in a kitchen holding a plate of food in front of a microwave, promoting BlueStars DIY microwave repair solutions.
WB26X10038 microwave turntable motor replacement with metal housing and two-pin electrical connector.
WB26X10038 microwave turntable motor showing dimensions and compatibility information.
Stainless steel microwave showing common repair symptoms like noisy operation or a non-rotating turntable.
WB26X10038 microwave turntable motor showing metal construction and technical specifications label.
Close-up of WB26X10038 microwave turntable motor showing 49TYZ synchronous motor specifications and D-shaped drive shaft.
Woman in a kitchen holding a plate of food in front of a microwave, promoting BlueStars DIY microwave repair solutions.
Lifetime Warranty

[Lifetime Warranty] WB26X10038 Microwave Turntable Motor Replacement - Compatible with GE & Kenmore Microwaves - Replaces 5304408980 WB26X10038 AP2024962 PS237772

Save 13%
0.00
$15.74
$18.10
$15.74
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

WB26X10038 Microwave Turntable Motor Replacement

Key Features

  • Synchronous drive motor designed to rotate the microwave's glass tray for consistent heat distribution.
  • Features a specialized 1/4-inch D-shaped metal shaft for a secure, non-slip connection to the turntable coupler.
  • Operates at a standard speed of 2.5/3 RPM (revolutions per minute) to ensure optimal microwave exposure.
  • Engineered with a low-noise internal gear set to eliminate grinding or clicking sounds during operation.
  • Equipped with two 3/16-inch male spade terminals for a quick-disconnect electrical connection.

Replaces / Cross-Reference Part Numbers

  • AP2024962
  • PS237772
  • 769741
  • SSM-16H
  • MDPJ030AF
  • EAP237772
  • AH237772
  • EA237772
  • ST16F
  • 15QBP1017

Compatibility & Fitment

  • General Electric (GE): Fits JVM, DVM, EMO, and CGLMV series (Over-the-Range and Countertop models).
  • Kenmore / Sears: Specifically models starting with 363 and 721 prefixes.
  • Hotpoint & RCA: Compatible with most mid-to-large capacity microwave platforms.
  • Specifications: Must be used with 21V AC (50/60Hz) power systems; not compatible with 120V motor systems.

When to Replace

  • No Rotation: The motor does not turn the glass tray, resulting in unevenly cooked food or cold spots.
  • Loud Noises: A persistent grinding, clicking, or loud humming sound originates from the bottom of the unit.
  • Intermittent Turning: The tray stutters, jerks, or stops and starts randomly during a cooking cycle.
  • Mechanical Failure: The internal plastic gears are stripped, or the shaft no longer engages with the coupler.

Installation Tips

  • Safety First: Unplug the microwave. High-voltage capacitors can hold a lethal charge; however, this repair is typically performed via the bottom access panel and does not require opening the main high-voltage cabinet.
  • Access: Lay the microwave on its side or back and remove the security screws on the bottom cover plate to expose the motor.
  • Orientation: Note the position of the wire terminals before disconnecting; the new motor should be installed in the same orientation to avoid straining the wires.
  • Shaft Alignment: Ensure the D-shaped shaft is fully seated into the plastic turntable coupler inside the microwave cavity before tightening the mounting screws.
  • Testing: After reassembly, place a cup of water on the tray and run a 30-second cycle to verify smooth, quiet rotation.
Brand Model Number
General Electric CFMV145KB001, CFMV145KS001, CGLMV168KB001, CGLMV168KB003, CGLMV168KQ001, CGLMV168KQ003, CGLMV168KS001, CGLMV168KS003, CPLMV168KC001, CPLMV168KC003, DVM1850BMC01, DVM1850BMC02, DVM1850DMBB01, DVM1850DMWW01, DVM1850MMBG01, DVM1850SMC01, DVM1850SMC02, DVM1850WMC01, DVM1850WMC02, EMO2000C01BB, EMO2000C01CC, EMO2000C01WW, EMO2000C02BB, EMO2000C02CC, EMO2000C02WW, EMO3000CBB001, EMO3000CBB02, EMO3000CBB03, EMO3000CBB04, EMO3000CCC001, EMO3000CCC02, EMO3000CCC03, EMO3000CCC04, EMO3000CSS001, EMO3000CSS02, EMO3000CSS03, EMO3000CSS04, EMO3000CWW001, EMO3000CWW02, EMO3000CWW03, EMO3000CWW04, EMO3000HBB01, EMO3000HBB02, EMO3000HBB03, EMO3000HBB04, EMO3000HBB05, EMO3000HCC01, EMO3000HCC02, EMO3000HCC03, EMO3000HCC04, EMO3000HCC05, EMO3000HSS01, EMO3000HSS02, EMO3000HSS03, EMO3000HSS04, EMO3000HSS05, EMO3000HWW01, EMO3000HWW02, EMO3000HWW03, EMO3000HWW04, EMO3000HWW05, EMO4000JBB01, EMO4000JBB02, EMO4000JBB03, EMO4000JBB04, EMO4000JBB05, EMO4000JCC01, EMO4000JCC02, EMO4000JCC03, EMO4000JCC04, EMO4000JCC05, EMO4000JSS01, EMO4000JSS02, EMO4000JSS03, EMO4000JSS04, EMO4000JSS05, EMO4000JWW01, EMO4000JWW02, EMO4000JWW03, EMO4000JWW04, EMO4000JWW05, EMO4000SJ01, EVM1750DM2BB, EVM1750DM2CC, EVM1750DM2WW, EVM1750DMBB01, EVM1750DMCC01, EVM1750DMWW01, EVM1750SM2SS, EVM1750SMSS01, FMV145KB001, FMV145KS001, GLMV168KB001, GLMV168KB003, GLMV168KQ001, GLMV168KQ003, GLMV168KS001, GLMV168KS003, GLMV168KS4, HDM1853BJ01, HDM1853BJ02, HDM1853BJ03, HDM1853BJ04, HDM1853BJ05, HDM1853BJ06, HDM1853GL01, HDM1853SJ01, HDM1853SJ02, HDM1853SJ03, HDM1853SJ04, HDM1853SJ05, HDM1853SJ06, HDM1853W, HDM1853WJ01, HDM1853WJ02, HDM1853WJ03, HDM1853WJ04, HDM1853WJ05, HDM1853WJ06, HVM1750DM2BB, HVM1750DM2WW, HVM1750DMBB01, HVM1750DMC, HVM1750DMWW01, HVM1750SM1SS, HVM1750SM2SS, HVM1750SMSS01, JNM1731DM1BB, JNM1731DM1CC, JNM1731DM1WW, JNM1731DM2BB, JNM1731DM2CC, JNM1731DM2WW, JNM1731DMBB01, JNM1731DMCC01, JNM1731DMWW01, JNM1851DMBB01, JNM1851DMCC01, JNM1851DMWW01, JVM1410BC001, JVM1410BC002, JVM1410WC001, JVM1410WC002, JVM1420BB01, JVM1420BB02, JVM1420WB01, JVM1420WB02, JVM1421BC002, JVM1421BC01, JVM1421WC002, JVM1421WC01, JVM1428BHC01, JVM1428BHC02, JVM1428SHC01, JVM1428SHC02, JVM1428WHC01, JVM1428WHC02, JVM1429BAC01
Kenmore 363.62702200, 363.62709200, 363.62709300
Hotpoint RVM1425BA004, RVM1425BA01, RVM1425BA02, RVM1425BA03, RVM1425WA004, RVM1425WA01, RVM1425WA02, RVM1425WA03, RVM1435BD001, RVM1435BD002, RVM1435BH001, RVM1435WD001, RVM1435WD002, RVM1435WH001, RVM1625BD001, RVM1625BD002, RVM1625BD003, RVM1625BD004, RVM1625SJ01, RVM1625WD001, RVM1625WD002, RVM1625WD003, RVM1625WD004
ATTENTION This is not a complete list of compatible models. You are welcome to reach our support if you are not sure about the compatibility of your appliance.
Material
Metal
Voltage
21V AC
Frequency
50/60Hz
Speed
2.5/3 RPM
Power
3.0W
Shaft Type
D-shaped
Rotation
CW / CCW
Diameter
~2 inches

FAQ

This motor is compatible with a wide range of GE, Kenmore, Hotpoint, and Frigidaire microwaves. It is a direct replacement for units using the SSM-16H or MDPJ030AF motor specifications, including various JVM, DVM, EMO, and RVM series microwaves.
This motor replaces OEM part numbers WB26X10038, 5304408980, AP2024962, PS237772, 769741, AH237772, EA237772, DE31-10172A, and DE31-10172B.
The most common signs are the glass tray failing to rotate, the tray moving jerkily, or hearing a grinding or clicking noise coming from the bottom of the microwave while it is running. Before replacing the motor, ensure the glass tray and the plastic coupler underneath are properly seated and free of debris.
Replacing this motor is a straightforward repair that typically takes 15 to 30 minutes. You will generally need a screwdriver to remove the access panel located on the bottom of the microwave. Always ensure the microwave is unplugged from the power source before beginning any work.
Yes. When installing, ensure the D-shaped shaft of the motor is properly aligned with the plastic coupler. It is also a good practice to inspect the plastic coupler for cracks or wear while you have the unit open, as a damaged coupler can sometimes mimic the symptoms of a failed motor.