[Lifetime Warranty] 02483859 24599 Double Roller Skid Shoe - Compatible with Ariens ST524 ST824 ST1024 ST1332 Deluxe Platinum Compact Pro 2-Stage Sno-Thro, John Deere MTD Snow Blower | Pack of 2
Two red snow blower double roller skid shoes with mounting slots.
Single red snow blower double roller skid shoe with informational text overlay.
Dimensional diagram of red snow blower double roller skid shoe showing measurements in inches.
Close-up view of a red heavy-duty steel snow blower double roller skid shoe showing its mounting slots and curved edge.
Informational graphic showing a red snow blower and symptoms indicating the need for 02483859 double roller skid shoes.
Instructional graphic for installing 02483859 snow blower double roller skid shoes with a four-step safety guide.
Two red double roller skid shoes for snow blowers, replacement parts for Ariens 02483859.
Two red snow blower double roller skid shoes with mounting slots.
Single red snow blower double roller skid shoe with informational text overlay.
Dimensional diagram of red snow blower double roller skid shoe showing measurements in inches.
Close-up view of a red heavy-duty steel snow blower double roller skid shoe showing its mounting slots and curved edge.
Informational graphic showing a red snow blower and symptoms indicating the need for 02483859 double roller skid shoes.
Instructional graphic for installing 02483859 snow blower double roller skid shoes with a four-step safety guide.
Two red double roller skid shoes for snow blowers, replacement parts for Ariens 02483859.
Lifetime Warranty

[Lifetime Warranty] 02483859 24599 Double Roller Skid Shoe - Compatible with Ariens ST524 ST824 ST1024 ST1332 Deluxe Platinum Compact Pro 2-Stage Sno-Thro, John Deere MTD Snow Blower | Pack of 2

Save 13%
0.00
$37.78
$43.45
$37.78
Out of stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

02483859 / 24599 Snow Blower Double Roller Skid Shoe

Key Features

  • Durable steel construction for cold-temperature operation
  • Reversible design doubles the service life
  • Protects the auger housing and scraper bar from damage
  • Dimensions:
    • Width: 3 5/8 inches
    • Length: 5 3/4 inches
    • Mounting Hole Center to Center: 3 inches
    • Slot Length: 1 1/16 inches

Replaces / Cross-Reference Part Numbers

  • Ariens: 02483859, 24599, 01016500, 02483851
  • John Deere: M124413, M144012
  • MTD: 05002-0637
  • Stens / Oregon / Rotary: 780-286, 73-028, 5568

Compatibility & Fitment

  • Fits a wide range of Ariens snow blowers from 20 to 36 inches, including but not limited to: Classic, Compact, and Deluxe series models.
  • Also compatible with select John Deere and AMP models.
  • Direct fit for models requiring part number 02483859.

When to Replace

  • Skid shoe is worn thin, cracked, or broken.
  • Uneven wear is causing the auger housing to tilt.
  • The shoe is bent or warped, preventing proper height adjustment.
  • The scraper bar is making direct contact with the ground surface.

Installation Tips

  • Ensure the snow blower is turned off and the spark plug is disconnected before starting work.
  • Raise the auger housing with a block of wood for easier access to the skid shoes.
  • Use original mounting hardware if it is in good condition; replace if corroded or stripped.
  • Adjust both skid shoes to the same height. Set a small gap (approx. 1/8 inch) between the scraper bar and a flat, level surface for clearing paved driveways. Increase the gap for gravel or uneven surfaces.
Product image 1
Product image 2
Product image 3
Product image 1
Product image 2
Product image
  • PERFECT FIT

    PERFECT FIT

    Replaces Ariens 02483859, 0106500, 0245995, 2483859, 106500, 245995, 2483851; Stens 780-283. Fit MTD John Deere Ariens snow blowers
  • PREMIUM MATERIAL

    PREMIUM MATERIAL

    Made of high-quality steel material, which is durable in cold temperatures down to 30 degrees below zero and wear-resistant
  • SAVING SOLUTION

    SAVING SOLUTION

    Enjoy the great feeling when your dryer is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble
  • SIMPLE INSTALLATION

    SIMPLE INSTALLATION

    Just 15 minutes of replacing to make the snowblowers run like new!
CONQUERED WINTER WITH EASE

CONQUERED WINTER WITH EASE

Simplify Snow Removal with Our Skid Shoes!

FAQ

This double roller skid shoe set is compatible with Ariens part numbers 02483859, 24599, 01028600, and 2483859. It also cross-references with John Deere M124412, M124413, and M144012, Toro 106-4588-01, and Oregon 73-028. This part is designed for use with Ariens, John Deere, Toro, MTD, and Bolens equipment.
Skid shoes support the scraper housing and help set the clearance between the auger housing and the ground. They keep the metal edge from riding directly on concrete, asphalt, gravel, or uneven surfaces, which helps reduce wear on the housing and improves control of scraping height.
Replace skid shoes if they are worn thin, unevenly ground down, bent, cracked, or no longer hold a stable adjustment. Other signs include the scraper bar contacting the ground, excessive metal scraping, the housing sitting unevenly, or the machine catching on expansion joints, gravel, or rough pavement.
Yes, these part numbers are designed for 2-stage snow thrower applications. This set fits various Ariens snow blowers, including models 924080 and 924082 with a 24-inch auger. Because snow blower fitment can vary by serial range and housing design, the safest check is to match your original part number and mounting pattern.
This is a straightforward replacement that typically takes 15 to 30 minutes for the pair. You will need two wrenches or a wrench-and-socket set sized for the mounting hardware. Support the machine safely, loosen the old shoes, install the new ones evenly on both sides, and adjust both shoes to the same height before fully tightening.
Check the scraper bar for wear, inspect the mounting bolts and nuts for corrosion, and ensure the auger housing sidewalls are not bent where the shoes mount. After installation, set the shoe height for your surface: use a tighter setting for smooth paved driveways, and allow for more clearance on gravel or uneven surfaces to reduce stone pickup.
Skid shoes are normal wear items. Faster wear is typically caused by frequent contact with rough pavement, aggressive low-height adjustment, uneven driveway joints, gravel surfaces, and operating with loose hardware that allows the shoe to shift. Replacing them before they wear through helps protect the scraper edge and housing.