Admiral Brand W10861000 Dishwasher Detergent Dispenser - For Whirlpool Kitchenaid Dishwasher - Replaces W10620296
W10861000 dishwasher detergent and rinse aid dispenser assembly for Whirlpool and KitchenAid dishwashers.
Hand placing a detergent tablet into a W10861000 dishwasher detergent dispenser for Whirlpool and KitchenAid models.
W10861000 dishwasher detergent dispenser with labeled dimensions for Whirlpool and KitchenAid models.
W10861000 dishwasher detergent dispenser replacement part with compatibility information chart.
W10861000 dishwasher detergent dispenser features showing upgraded latch, rinse aid compartment, and durable construction.
Six-step installation guide for W10861000 dishwasher detergent dispenser replacement.
Compatibility chart for W10861000 dishwasher detergent dispenser listing Whirlpool and KitchenAid models.
Compatibility chart for W10861000 dishwasher detergent dispenser listing Whirlpool, Maytag, Amana, and Kenmore models.
Front and back view of W10861000 dishwasher detergent dispenser for Whirlpool and KitchenAid dishwashers.
W10861000 dishwasher detergent and rinse aid dispenser assembly for Whirlpool and KitchenAid dishwashers.
Hand placing a detergent tablet into a W10861000 dishwasher detergent dispenser for Whirlpool and KitchenAid models.
W10861000 dishwasher detergent dispenser with labeled dimensions for Whirlpool and KitchenAid models.
W10861000 dishwasher detergent dispenser replacement part with compatibility information chart.
W10861000 dishwasher detergent dispenser features showing upgraded latch, rinse aid compartment, and durable construction.
Six-step installation guide for W10861000 dishwasher detergent dispenser replacement.
Compatibility chart for W10861000 dishwasher detergent dispenser listing Whirlpool and KitchenAid models.
Compatibility chart for W10861000 dishwasher detergent dispenser listing Whirlpool, Maytag, Amana, and Kenmore models.
Front and back view of W10861000 dishwasher detergent dispenser for Whirlpool and KitchenAid dishwashers.

W10861000 Dishwasher Detergent Dispenser - For Whirlpool Kitchenaid Dishwasher - Replaces W10620296

0.00
$64.77
Save 11% $72.54
$64.77
Out of stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

W10861000 Dishwasher Detergent Dispenser

Key Features

  • Dual-Function Integrated Design: A single, high-performance module that houses both the main wash detergent compartment and the adjustable rinse aid reservoir for a complete cleaning cycle.
  • Precision Sliding Door Mechanism: Features an upgraded internal spring and latch system designed to release the detergent pod or powder at the exact moment required by the wash cycle.
  • Adjustable Rinse Aid Dosage: Includes an internal setting dial that allows you to control the amount of rinse aid released per cycle, helping to eliminate spots and film on glassware.
  • High-Temperature Seal Integrity: Manufactured with specialized EPDM rubber gaskets that maintain a watertight seal against the inner door panel, even during "High-Temp Wash" and "Sani-Rinse" settings.
  • Clear Visual Indicator: Equipped with a transparent optical window that allows you to check rinse aid levels at a glance without opening the reservoir cap.

Replaces / Cross-Reference Part Numbers

  • Primary Part: W10861000, W10861000VP.
  • Legacy Cross-Reference: W10620296, W10620298, W10620297.

Compatibility & Fitment

This dispenser assembly is the standard replacement for most modern Whirlpool-built tall-tub dishwashers. Key compatible models include:

  • Whirlpool: WDT730PAHZ0, WDT750SAKZ0, WDT970SAHZ0, WDF520PADM.
  • KitchenAid: KDTM354ESS, KDTE104ESS, KDTM404EWH.
  • Maytag: MDB4949SHZ, MDB8959SKZ, MDB7949SDM.
  • Kenmore: 665.13263K311, 665.13223K210.
  • Note: Specifically for models utilizing the sliding door dispenser style. If your original door flips open like a "mailbox," this part may not be compatible.

When to Replace

  • Detergent Door Not Opening: The door stays closed throughout the entire cycle, leaving the detergent pod or powder untouched and the dishes dirty.
  • Detergent Door Won't Stay Closed: The latch is broken or the internal spring has snapped, causing the door to slide open as soon as you close the dishwasher.
  • Rinse Aid Leaking: You find blue or clear liquid streaking down the inner door, indicating a failed internal seal or a cracked reservoir.
  • Broken Latch or Spring: Visible damage to the plastic slider or the small latch tab that prevents the dispenser from engaging.
  • "No Rinse Aid" Error: The sensor or float inside the dispenser has failed, causing a persistent warning light on the control panel even when full.

Installation Tips

  • Safety First: You MUST unplug the dishwasher or turn off the circuit breaker before beginning. This repair requires removing the outer door panel, which exposes high-voltage wiring.
  • Remove the Outer Panel: Open the dishwasher door and remove the Torx or Phillips screws around the perimeter of the inner panel. Hold the outer panel securely so it doesn't fall and scratch your floor.
  • Disconnect Wiring: Carefully unplug the electrical wire harness from the old dispenser. Take a photo beforehand to ensure the connectors are returned to the correct terminals.
  • Check the Door Seal: When installing the new W10861000, ensure the large rubber gasket is seated perfectly flat against the inner door metal to prevent leaks inside the door.
  • Tighten Evenly: Secure the mounting bracket screws in a star pattern. Do not over-tighten, as the plastic housing of the dispenser can crack under excessive pressure.

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

W10861000 is used on select dishwashers from Whirlpool, KitchenAid, Maytag, and Amana. Based on available compatibility references, it fits certain Whirlpool WDF and WDT series models, KitchenAid KDFE, KDPE, KDPM, and KDTE series models, Maytag MDB series models, and Amana ADB1700 series models. Example models mentioned in references include WDT730PAHZ0, WDT970SAHZ0, WDT750SAHZ0, WDTA50SAHZ0, and WDT780SAEM1. Always confirm with your full model number before ordering, since not every dishwasher in those series uses the same dispenser.
This dispenser is associated with part number W10861000 and is commonly cross-referenced to W10620296, W10620297, W10620298, W10620299, W10876529, W10861000VP, 4383990, PS11731570, AP5999391, EAP11731570, EA11731570, and AH11731570. Match both the part number and your dishwasher model to verify fit.
Typical symptoms include the detergent door not opening during the wash cycle, the latch not staying closed, the soap pod or powder still being inside at the end of the cycle, rinse aid leaking, or visible cracks in the dispenser housing. You may also notice poor cleaning results caused by detergent being released too late or not at all.
Installation is usually a medium-difficulty repair because the inner door panel normally has to be removed to access the dispenser mounting area. In most cases, you will need a screwdriver set, often including Torx bits, and possibly needle-nose pliers for wire connectors. For many DIY repairs, the job takes about 20 to 45 minutes. Disconnect power to the dishwasher before starting.
Before replacing it, check whether the dispenser door is being blocked by large dishes or utensil handles, since that can mimic a bad dispenser. Also inspect the latch area for detergent buildup, the door seal for leaks, and the wiring connection to the dispenser if your model uses an electrically actuated release. If the cup is cracked, the latch spring is weak, or rinse aid is leaking from the body, replacement is usually the better fix.
Common causes include repeated heat exposure, broken latch components, warped plastic, mineral or detergent residue that prevents the door from moving freely, and impact damage from loading dishes. On rinse-aid/dispenser assemblies, leaking can also develop as seals age. If the dispenser fails repeatedly, check that the door panel is aligned correctly and that items in the rack are not striking the dispenser door during each cycle.