[Lifetime Warranty] Main Brush Rollers Replacement for Ecovacs Deebot OZMO T8, T8 AIVI, T9, N8, N8+, N8 Pro Plus, X1, X1 Turbo, X1 Plus, T10 Plus, 920, 950, T5, N10 Plus Robot Vacuums - Pack of 2

Main Brush Rollers Replacement for Ecovacs Deebot OZMO T8, T8 AIVI, T9, N8, N8+, N8 Pro Plus, X1, X1 Turbo, X1 Plus, T10 Plus, 920, 950, T5, N10 Plus - Pack of 2

Key Features

• Dual-material construction featuring high-density nylon bristles and durable rubber strips for comprehensive debris agitation.
• V-pattern bristle arrangement designed to centralize dust and hair into the primary suction intake.
• Integrated floor-safe design to prevent scratching on hardwood, laminate, and tile surfaces while maintaining deep-clean contact on carpets.
• Precision-molded end caps and high-speed bearings for reduced friction and noise during high-RPM operation.
• Optimized for varied floor heights through a self-adjusting mechanical interface with the cleaning module.

Replaces / Cross-Reference Part Numbers

• 201-1243-0501
• D-S-E01-MB
• ECO-T8-BRUSH

Compatibility & Fitment

• Ecovacs Deebot OZMO T8 / T8 AIVI / T8+
• Ecovacs Deebot T9 / T9+
• Ecovacs Deebot N8 / N8+ / N8 Pro / N8 Pro Plus
• Ecovacs Deebot X1 / X1 Turbo / X1 Plus / X1 Omni
• Ecovacs Deebot T10 / T10 Plus / T10 Omni
• Ecovacs Deebot 920 / 950
• Ecovacs Deebot T5
• Ecovacs Deebot N10 / N10 Plus

When to Replace

• Bristles appear frayed, flattened, or are missing from the roller core.
• The rubber blades show signs of tearing or significant thinning.
• Noticeable decrease in debris pickup or increased vacuuming time for standard areas.
• Excessive vibration or unusual grinding noises originating from the bottom of the unit.
• Standard maintenance cycle: Replace every 6 to 12 months depending on usage frequency and floor type.

Installation Tips

• Ensure the robot vacuum is powered off and removed from the charging dock before maintenance.
• Press the two release tabs on the brush cover simultaneously to remove the protective grate.
• Lift the old brush roller out; check the square and round housing slots for trapped hair or debris.
• Insert the new roller by aligning the fixed end first, then snapping the motor-driven end into the square gear slot.
• Reinstall the brush cover and ensure the tabs click firmly into place to maintain the vacuum seal.