[Lifetime Warranty] 32225 Wick - Fit for Kero World KW-24C DuraHeat DH-2300 Dyna-GLO CV-2300&RMC-95C Envirotemp CV-2300 Keroheat CV-2300 Kerosene Heater - Pack of 2
Two 32225 replacement wicks for Kero World, DuraHeat, and Dyna-GLO kerosene heaters with orange fabric bands.
32225 kerosene heater wick dimensions diagram showing 7.4-inch width and 7.9-inch height for compatible heater models.
Infographic showing 32225 kerosene heater wick construction, fiberglass material, and fine weave structure details.
32225 replacement kerosene heater wick for Kero World, Dyna-GLO, and Envirotemp heaters shown in lifestyle graphic.
32225 replacement wick for kerosene heaters shown with compatible heater model and troubleshooting symptoms.
Compatibility chart for 32225 kerosene heater wick listing compatible models and replacement part numbers.
Operating kerosene heater with glowing burner element for 32225 wick replacement compatibility.
Four-step installation guide for replacing a 32225 kerosene heater wick in a burner assembly.
Two 32225 replacement wicks for Kero World, DuraHeat, and Dyna-GLO kerosene heaters with BlueStars branding.
Two 32225 replacement wicks for Kero World, DuraHeat, and Dyna-GLO kerosene heaters with orange fabric bands.
32225 kerosene heater wick dimensions diagram showing 7.4-inch width and 7.9-inch height for compatible heater models.
Infographic showing 32225 kerosene heater wick construction, fiberglass material, and fine weave structure details.
32225 replacement kerosene heater wick for Kero World, Dyna-GLO, and Envirotemp heaters shown in lifestyle graphic.
32225 replacement wick for kerosene heaters shown with compatible heater model and troubleshooting symptoms.
Compatibility chart for 32225 kerosene heater wick listing compatible models and replacement part numbers.
Operating kerosene heater with glowing burner element for 32225 wick replacement compatibility.
Four-step installation guide for replacing a 32225 kerosene heater wick in a burner assembly.
Two 32225 replacement wicks for Kero World, DuraHeat, and Dyna-GLO kerosene heaters with BlueStars branding.
Lifetime Warranty

[Lifetime Warranty] 32225 Wick - Fit for Kero World KW-24C DuraHeat DH-2300 Dyna-GLO CV-2300&RMC-95C Envirotemp CV-2300 Keroheat CV-2300 Kerosene Heater - Pack of 2

Save 30%
0.00
$26.20
$37.43
$26.20
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

ADQ56656403 Lint Filter Replacement - 11.2" x 10.9" Dryer Lint Filter Trap Screen Strainer - Replaces 4960837 AP7012980 PS16546780

Key Features

  • Dimensions: 11.2 inches x 10.9 inches
  • Traps lint and debris to maintain dryer airflow
  • Durable plastic frame with a fine mesh screen
  • Direct replacement for specified part numbers

Replaces / Cross-Reference Part Numbers

  • ADQ56656403
  • 4960837
  • AP7012980
  • PS16546780

Compatibility & Fitment

  • Designed for select clothes dryer models.
  • Confirm fitment by cross-referencing your original part number or measuring the filter housing.

When to Replace

  • Visible damage, such as tears, holes, or a broken frame.
  • Filter is warped and no longer fits securely.
  • Excessive lint bypasses the screen.

Installation Tips

  • Disconnect the dryer from its power source before servicing.
  • Remove the old filter from its slot.
  • Clean any accumulated lint from the filter housing.
  • Slide the new filter into place until it is fully seated.

FAQ

The 32225 wick is designed for use with Kero World KW-24C, DuraHeat DH-2300, Dyna-GLO CV-2300 and RMC-95C, Envirotemp CV-2300, and Keroheat CV-2300. It is also compatible with DuraHeat DH2300-series variations, including DH-2301, DH-2302, and DH-2303. Because kerosene heaters can have model-year differences, we recommend confirming the 32225 part number on your old wick, owner’s manual, or heater parts list before ordering.
This wick replaces part number 32225. This is the primary number to match when verifying compatibility with your specific heater.
Typical symptoms include hard starting, a weak or uneven flame, excessive odor or smoke, difficulty raising the flame, or the wick not adjusting smoothly. If the heater shuts down because it cannot maintain proper combustion, or if the wick appears carboned up, glazed, frayed, or contaminated by old fuel, it is time for a replacement.
Common causes include carbon buildup from normal operation, the use of stale or contaminated kerosene, and the presence of moisture or impurities in the fuel. Using fuel other than the recommended kerosene can damage wick performance. Additionally, storing the heater for long periods with fuel in the tank can cause the wick to harden or foul, leading to poor fuel absorption and uneven burning.
For most portable kerosene heaters, wick replacement is a moderate repair that typically takes 30 to 60 minutes. You will generally need a screwdriver set and possibly needle-nose pliers. The process involves removing the outer cabinet, accessing the burner and wick assembly, installing the new wick at the correct height, and reassembling the unit. It is important to follow your heater’s service instructions to ensure the wick sits evenly and the igniter is properly aligned.
Before installation, drain any stale fuel, inspect the tank for water or debris, and clean carbon residue from the burner area if accessible. Ensure the wick adjuster moves freely and the igniter is functioning. After installing the new wick, allow it to soak thoroughly in fresh kerosene before the first lighting to ensure even fuel absorption.
Yes. A new wick must be fully saturated with fresh kerosene before lighting; if it is lit too soon, it may char prematurely and shorten the life of the wick. After soaking, monitor the first burn to ensure an even flame pattern and normal odor levels. If the flame is uneven, recheck the wick height and installation alignment.