[Lifetime Warranty] HEPA Filter with White Mesh for INSE N5S N5T S6T S6P Pro S610/ TMA T120 T121 T151 T150 T220 T210 T181 T180 T220 Cordless Vacuum Cleaners | Pack of 4 + Brush

HEPA Filter with Mesh Guard for INSE and TMA Cordless Vacuums

Key Features

• High-efficiency particulate air (HEPA) media designed to capture 99.97% of dust, pet hair, and fine debris down to 0.3 microns.
• Integrated white mesh pre-filter layer protects the delicate HEPA pleats from large debris, extending the service life of the filter.
• Washable and reusable construction allows for sustained filtration performance and reduced maintenance costs.
• Precision-molded gasket ensures a vacuum-tight seal to prevent unfiltered air bypass and motor contamination.
• Includes a specialized cleaning brush to safely remove surface dust from filter pleats between wash cycles.

Replaces / Cross-Reference Part Numbers

• Direct replacement for pads used with INSE N5S N5T S6T S6P Pro S610/ TMA T120 T121 T151 T150 T220 T210 T181 T180 T220

Compatibility & Fitment

• INSE Models: N5S, N5T, S6T, S6P, S6P Pro, S610
• TMA Models: T120, T121, T150, T151, T180, T181, T210, T220
• Compatible with select cordless stick vacuum platforms using the 3.1-inch diameter circular filter housing.

When to Replace

• Decreased Suction: Replace if the vacuum exhibits reduced airflow or struggles to lift standard debris.
• Odor Issues: Replace if a persistent dusty or musty smell emanates from the exhaust during operation.
• Visible Damage: Replace immediately if the HEPA pleats are torn, the mesh is punctured, or the rubber gasket is cracked.
• Maintenance Cycle: Replace every 3 to 4 months for optimal motor protection and air filtration.

Installation Tips

• Power off the vacuum and disconnect the battery or charging cable before accessing the filter compartment.
• Twist the top of the dust cup or press the release latch (depending on model) to expose the internal filter assembly.
• Remove the old filter and wipe the interior of the filter housing with a damp cloth to remove accumulated fine dust.
• Ensure the new filter is pressed firmly into place to engage the airtight seal before reassembling the dust cup.
• If washing the filter, rinse only with cold water and allow it to air dry completely (minimum 24 hours) before reuse to prevent motor damage.