[Lifetime Warranty] 4560 Conversion Adapters Kit - Compatible with Intex Hayward Coleman, Filter Hose Conversion Kit 40mm to 1 1/2 Inch Pool Hose Adapter Fitting, Above Ground Pool Pump Connector | Pack of 4
Set of 4 pool hose conversion adapters with O-rings and gaskets for 40mm to 1 1/2 inch pool pump connections.
Dimensional diagram of 4560 pool hose conversion adapter components with measurements in inches.
Pool hose adapter conversion kit components including adapters, O-rings, sealing washers, and plumber's tape.
Diagram showing 4560 conversion adapter kit connecting pool pumps and filters to Intex and Coleman pool hoses.
Diagram showing 4560 conversion adapter connecting 40mm pool hoses to 1 1/2 inch filter pump ports.
Close-up details of 4560 pool hose conversion adapter showing ABS material, threaded design, and rubber gasket.
4560 pool hose conversion adapter for 40mm to 1 1/2 inch threaded filter pump connections.
Comparison graphic showing BlueStars 40mm to 1 1/2 inch pool hose conversion adapter versus a worn-out competitor part.
Close-up of 4560 pool hose conversion adapter fitting for above ground pool pumps.
Infographic showing 4560 pool hose conversion adapter compatibility with Intex, Hayward, and Coleman filtration systems.
Set of 4 pool hose conversion adapters with O-rings and gaskets for 40mm to 1 1/2 inch pool pump connections.
Dimensional diagram of 4560 pool hose conversion adapter components with measurements in inches.
Pool hose adapter conversion kit components including adapters, O-rings, sealing washers, and plumber's tape.
Diagram showing 4560 conversion adapter kit connecting pool pumps and filters to Intex and Coleman pool hoses.
Diagram showing 4560 conversion adapter connecting 40mm pool hoses to 1 1/2 inch filter pump ports.
Close-up details of 4560 pool hose conversion adapter showing ABS material, threaded design, and rubber gasket.
4560 pool hose conversion adapter for 40mm to 1 1/2 inch threaded filter pump connections.
Comparison graphic showing BlueStars 40mm to 1 1/2 inch pool hose conversion adapter versus a worn-out competitor part.
Close-up of 4560 pool hose conversion adapter fitting for above ground pool pumps.
Infographic showing 4560 pool hose conversion adapter compatibility with Intex, Hayward, and Coleman filtration systems.
Lifetime Warranty

[Lifetime Warranty] 4560 Conversion Adapters Kit - Compatible with Intex Hayward Coleman, Filter Hose Conversion Kit 40mm to 1 1/2 Inch Pool Hose Adapter Fitting, Above Ground Pool Pump Connector | Pack of 4

Save 13%
0.00
$17.49
$20.11
$17.49
Out of stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

4560 Conversion Adapters Kit

Key Features

  • Converts 40mm hose connections to standard 1.5-inch and 1.25-inch filter ports.
  • Enables the use of different-sized pumps, filters, and hoses on above-ground pools.
  • Allows for upgrading filtration systems with mismatched components.

Replaces / Cross-Reference Part Numbers

  • 4560
  • GAME 4560

Compatibility & Fitment

  • Designed for Intex and Coleman brand soft-sided or above-ground pools.
  • Connects 40mm hoses to standard Hayward skimmers, sand filters, and pumps.
  • Compatible with Intex plunger valves and filter systems requiring a 1.25-inch or 1.5-inch connection.

When to Replace

  • When upgrading a pool's pump or filter system to a model with different port sizes.
  • To connect equipment from different manufacturers with incompatible fittings.
  • To replace a lost, cracked, or damaged adapter.

Installation Tips

  • Ensure the pool pump is turned off before starting installation.
  • Attach the 40mm end of the adapter to the pool hose.
  • Attach the 1.5-inch end to the filter pump, skimmer, or plunger valve port.
  • Hand-tighten all connections to ensure a secure seal.
  • Use appropriate hose clamps on non-threaded connections to prevent leaks.
  • After installation, turn the pump on and check all connection points for drips.
Product image
Product image
Product image
Product image
  • HEAVY-DUTY PLASTIC

    HEAVY-DUTY PLASTIC

    Made from heavy-duty, UV-resistant plastic. Stands up to sun exposure and pool chemicals without cracking
  • SECURE HOSE CONNECTION

    SECURE HOSE CONNECTION

    Reliable locking mechanism keeps hoses firmly in place during active filtration and cleaning.
  • LONG-LASTING DURABILITY

    LONG-LASTING DURABILITY

    Engineered to maintain a secure, leak-free seal through multiple summer seasons
  • IMPORTANT NOTE

    IMPORTANT NOTE

    This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility
#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

Enjoy the comfort that our small yet mighty parts bring to your home

FAQ

This kit is designed for above-ground pool setups requiring a connection between a 40 mm hose and a 1 1/2 inch pool hose. It is compatible with Intex, Hayward, and Coleman pool or pump hose connections that utilize these specific sizes. Always confirm your existing hose diameter and connector style before ordering, as compatibility depends on the fitting size at the pump, filter, or pool wall connection.
The 4560 conversion adapter kit bridges two common pool hose connection sizes: 40 mm and 1 1/2 inch. It allows components to connect properly when a pump, filter, plunger valve, or pool port uses one size and your hose or accessory uses the other, eliminating the need to replace your entire hose setup.
You may need this adapter if you are upgrading or replacing a pool pump or filter and the hose connections no longer match your existing equipment. Common indicators include a hose that is slightly too large or too small for the port, difficulty tightening the connection, or leaks resulting from mismatched fittings. This is particularly useful when combining components from brands such as Intex, Hayward, and Coleman that utilize different connection standards.
This kit is identified by part number 4560. When matching an existing adapter, verify both the 4560 reference and the required connection sizes of 40 mm and 1 1/2 inch.
Installation is straightforward and typically takes 10 to 20 minutes for most above-ground pool owners. In many cases, no special tools are required beyond your existing hose clamps or threaded collars, though a screwdriver or pliers may be helpful if your system uses clamp-style hose connections. Before installing, shut off the pump, relieve pressure, and lower or plug the water flow to minimize spillage.
Before installation, verify the hose inside diameter, the port size on the pump or filter, the condition of the hose ends, and the integrity of your clamps or threaded collars. Additionally, inspect for cracked hoses, worn sealing surfaces, or flattened gaskets, as leaks are frequently caused by degraded hoses or seals rather than the adapter itself.