[Lifetime Warranty] 16952-Z8B-000 GCV160 Fuel Filter - Compatible with Honda GCV190 GC160LA GC190LA GCV160A0 GCV160LA0 GCV160LA1 GCV190LA GC160 GC190 GS190 HRX217 HRN216 HRR216 HRC216K3 Lawn Mower Engine | Pack of 2

16952-Z8B-000 Fuel Filter for Honda GCV & GC Series Engines

Key Features

• High-Efficiency Micron Filtration: Engineered with a fine-mesh internal screen designed to trap microscopic dirt, rust, and debris before they can reach and clog the delicate jets of your carburetor.
• Translucent Inspection Housing: The clear polymer casing allows for instant visual monitoring of fuel flow and debris accumulation, making it easy to determine when the filter needs replacement.
• Precision-Molded Barbed Fittings: Features standard 1/4-inch (approx. 6mm) inlet and outlet ports that ensure a secure, vacuum-tight fit into your mower's fuel lines, preventing leaks and air infiltration.
• Ethanol-Compatible Construction: Manufactured from chemical-resistant materials specifically designed to withstand modern ethanol-blended fuels, preventing the housing from becoming soft or brittle over time.
• Optimized Gravity-Flow Design: Specifically calibrated for gravity-fed fuel systems, ensuring consistent fuel delivery to the engine without causing vapor lock or restricted flow during heavy cutting.

Replaces / Cross-Reference Part Numbers

• 16952-Z8B-000
• 16952Z8B000
• 16910-ZV4-015
• 16910ZV4015

Compatibility & Fitment

This fuel filter is the factory-standard replacement for a wide range of Honda-powered outdoor equipment. Key compatible models include:

• Honda Engines: GCV160, GCV190, GC160, GC160LA, GC190, GC190LA, and GS190 series.
• Honda HRX Series Mowers: Fits HRX217, HRX217K1, HRX217K2, HRX217K3, HRX217K4, HRX217K5, and HRX217K6.
• Honda HRN/HRR Series Mowers: Compatible with HRN216, HRR216, and HRR216K9 models.
• Honda HRC Commercial Mowers: Fits HRC216K3 commercial walking mowers.
• Note: Some newer GCV160/190 "A0" and "LA" variants use this specific compact filter. Always check that your current fuel line is 1/4" internal diameter before purchasing.

When to Replace

• Engine Sputtering or Surging: If the engine runs unevenly or "hunts" for RPMs, it is often a sign of a partially clogged filter restricting the constant flow of fuel.
• Hard Starting: A dirty filter can cause a delay in fuel reaching the combustion chamber, requiring more pulls to start the mower.
• Visible Debris in Housing: If you see dark particles or water droplets inside the clear filter housing, the unit has reached its capacity and should be swapped.
• Annual Tune-Up: As a best practice, fuel filters should be replaced at the start of every mowing season to prevent stale fuel sediment from damaging the carburetor.

Installation Tips

• Safety First (CRITICAL): Work in a well-ventilated area away from sparks or flames. Have a small container or rag ready to catch any fuel that remains in the lines.
• Follow the Arrow (PRO TIP): Look for the small "FLOW" arrow molded into the side of the filter. The arrow must point **away** from the fuel tank and **toward** the carburetor.
• Hose Clamp Check: Use needle-nose pliers to squeeze the hose clamps and slide them back about 2 inches before pulling the old filter off. If your hoses are cracked or stiff, replace them at the same time.
• Drain the Tank: If the fuel in the tank is older than 30 days, it is recommended to drain it and use fresh, stabilized fuel after installing the new filter.