House - Furnace Parts 0130F00010 Furnace Flame Sensor Replacement - For Goodman Amana Furnaces - 3 Pack
Set of three 0130F00010 furnace flame sensors with white ceramic insulators and metal mounting brackets.
0130F00010 flame sensor dimensions diagram showing 3.8-inch length and 1.2-inch width with installation handling tips.
Two 0130F00010 flame sensors with heat-resistant ceramic insulation and mounting brackets.
0130F00010 flame sensor diagram highlighting ceramic insulator, terminal connector, mounting bracket, and steel rod.
0130F00010 flame sensor compatibility chart showing compatible furnace brands, part numbers, and models.
0130F00010 flame sensor shown in a lifestyle graphic illustrating furnace repair symptoms like short cycling.
Step-by-step installation guide for 0130F00010 furnace flame sensor replacement.
Comparison chart showing 0130F00010 flame sensor features versus generic alternatives.
Single 0130F00010 flame sensor replacement part with mounting bracket and ceramic insulation.
Set of three 0130F00010 furnace flame sensors with white ceramic insulators and metal mounting brackets.
0130F00010 flame sensor dimensions diagram showing 3.8-inch length and 1.2-inch width with installation handling tips.
Two 0130F00010 flame sensors with heat-resistant ceramic insulation and mounting brackets.
0130F00010 flame sensor diagram highlighting ceramic insulator, terminal connector, mounting bracket, and steel rod.
0130F00010 flame sensor compatibility chart showing compatible furnace brands, part numbers, and models.
0130F00010 flame sensor shown in a lifestyle graphic illustrating furnace repair symptoms like short cycling.
Step-by-step installation guide for 0130F00010 furnace flame sensor replacement.
Comparison chart showing 0130F00010 flame sensor features versus generic alternatives.
Single 0130F00010 flame sensor replacement part with mounting bracket and ceramic insulation.
Lifetime Warranty

0130F00010 Furnace Flame Sensor Replacement - For Goodman Amana Furnaces - 3 Pack

Save 13%
0.00
$14.12
$16.24
$14.12
Out of stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

0130F00010 Flame Sensor

Key Features

  • Detects flame in gas furnace burner assemblies for safe operation.
  • Direct-fit replacement part for gas HVAC systems.
  • Total length: 3.8 inches.

Replaces / Cross-Reference Part Numbers

  • 0130F00010
  • B1172606
  • B11726-06
  • 20488501
  • TJFLS013
  • 2645136
  • AP4513976
  • AP6326767
  • L38035
  • ACS90453BXA

Compatibility & Fitment

  • Designed for many Goodman and Amana brand gas furnaces.
  • Compatible with models including ACS90453BXA.
  • Always verify fitment using your furnace model number and original part number.

When to Replace

  • Furnace ignites but shuts off after only a few seconds.
  • Heavy carbon buildup or corrosion on the existing sensor rod.
  • Visible cracks in the porcelain insulator.
  • HVAC system indicates a flame sensor error code.

Installation Tips

  • Always disconnect power to the furnace before servicing.
  • The sensor is typically secured to the burner assembly with a single screw.
  • Handle the new sensor by its porcelain base to avoid contaminating the metal rod with skin oils.
  • Ensure the rod is positioned directly in the flame path for proper operation.
Product image
Product image
Product image
  • SENSITIVE FLAME DETECTION

    SENSITIVE FLAME DETECTION

    Ensures the gas valve opens only when a flame is present, preventing gas buildup and keeping your home safe
  • FIX FURNACE'S SYMPTOMS

    FIX FURNACE'S SYMPTOMS

    Short cycling | No heat or inconsistent heating | Delayed ignition | Error codes | Dirty flame sensor rod | Cracked ceramic insulator
  • EFFECTIVE SOLUTION

    EFFECTIVE SOLUTION

    Enjoy the great feeling when your furnace works properly like before - BlueStars brings DIY solutions to help you deal with any trouble
  • HIGH QUALITY

    HIGH QUALITY

    Made of premium materials to withstand high temperatures and ensure accurate flame detection with long-lasting performance
WIDE COMPATIBILITY

WIDE COMPATIBILITY

Replaces Part Numbers: B1172606, B11726-06, 20488501, ACS90453BXA, P1257001F, P1257007F, ACS90703BXA, P1257002F, P1257008F, AP4513976, L38035. Compatible Brands: Kenmore, Amana, Goodman furnaces. *This replacement part is designed for specific appliances. Brand names are used for reference only.
FITS MODELS

FITS MODELS

GMS80603AX, GMS80604BX, GMS80603AN, GMS80604BN, GMS80804BN, GDS80403AN, GDS80603AN, GDS80804BN, GDS81005CN, GMSS960402BN, GMSS960603BN, GMSS960803BN, GCSS960402BN, GCSS960603BN, GCSS960804CN, GCSS961005CN, GCSS961205D, etc
6 SIMPLE STEPS

6 SIMPLE STEPS

1. Turn off furnace power, close gas valve, and remove the front panel. Then locate the flame sensor & Disconnect the wire; 2. Uncrew and remove the old flame sensor & Install the new one, secure it into place, and reconnect wire; 3. Reattach the panel, open gas valve and turn power back on. *Note: Use work gloves during installation for safety. Avoid touching the metal rod part as oils from your skin can cause carbon buildup and premature failure, hold it only by the ceramic base.
Style
‎Straight rod
Overall Dimensions
‎3-3/4" L x 1-1/4" W x 3/4" H
Element (Rod) Length
‎2-1/8"
Bracket Length
‎1-1/4"
Connection
‎Male spade terminal
Material
‎Metal rod with porcelain (ceramic) insulator
Color
‎Silver / White

FAQ

This sensor is compatible with a wide range of Goodman, Amana, and Daikin furnace models. It is a direct replacement for part number 0130F00010 and replaces several older part numbers, including B1172606, B11726-06, 20488501, ACS90453BXA, P1257001F, P1257007F, 2645136, AP4513976, AP6326767, TJFLS013, and TJ-FLS013.
The most common symptom is the furnace burner igniting for a few seconds and then shutting off immediately. This cycle often repeats three times before the furnace goes into a lockout mode. This happens because the sensor is unable to detect the flame and signals the control board to cut the gas supply as a safety precaution.
Flame sensors are designed to sit directly in the burner flame. Over time, carbon buildup, oxidation, or debris can accumulate on the sensor rod. This layer acts as an insulator, preventing the sensor from detecting the electrical current flowing through the flame. While cleaning the rod with a fine-grit abrasive pad can sometimes resolve the issue, a replacement is necessary if the rod is cracked, corroded, or if cleaning no longer restores functionality.
Installation is straightforward and typically takes about 10 to 15 minutes. You will generally only need a 1/4-inch nut driver or a screwdriver to remove the single mounting screw and the wire connector. Always ensure the power to the furnace is turned off at the breaker or service switch before beginning the installation.
When installing the new sensor, handle it by the ceramic porcelain base rather than the metal rod. Oils from your skin can leave residue on the rod that may cause premature carbon buildup. Ensure the sensor is positioned so that the rod is placed directly into the path of the burner flame, but verify that it does not make physical contact with the burner itself, as this can cause a short circuit.