Briggs & Stratton Brand [Lifetime Warranty] 725-1426 Starter Solenoid - Compatible with MTD 925-1426 925-1426A 725-1426A 725-0771 925-0771 Snapper 18817 75671 Toro 112-0309 334009B 435-065 Mower
725-1426 starter solenoid for lawn mowers with dual copper terminals and mounting bracket.
Dimensional diagram of 725-1426 starter solenoid showing measurements and technical specifications.
725-1426 starter solenoid for lawn mowers shown in a lifestyle graphic with a man mowing the lawn.
Infographic showing construction features of 725-1426 starter solenoid including copper studs, terminals, and housing.
Infographic showing 725-1426 starter solenoid with 180°C copper wire coil detail for mower compatibility.
725-1426 starter solenoid for MTD riding lawn mowers with compatibility and replacement part number information.
Compatibility chart for 725-1426 starter solenoid listing MTD, Snapper, Toro, and AYP mower model numbers.
Installation diagram for 725-1426 starter solenoid showing connections to mower motor, battery, and ignition switch.
725-1426 starter solenoid replacement part for lawn mowers shown on a branded BlueStars promotional graphic.
725-1426 starter solenoid for lawn mowers with dual copper terminals and mounting bracket.
Dimensional diagram of 725-1426 starter solenoid showing measurements and technical specifications.
725-1426 starter solenoid for lawn mowers shown in a lifestyle graphic with a man mowing the lawn.
Infographic showing construction features of 725-1426 starter solenoid including copper studs, terminals, and housing.
Infographic showing 725-1426 starter solenoid with 180°C copper wire coil detail for mower compatibility.
725-1426 starter solenoid for MTD riding lawn mowers with compatibility and replacement part number information.
Compatibility chart for 725-1426 starter solenoid listing MTD, Snapper, Toro, and AYP mower model numbers.
Installation diagram for 725-1426 starter solenoid showing connections to mower motor, battery, and ignition switch.
725-1426 starter solenoid replacement part for lawn mowers shown on a branded BlueStars promotional graphic.
Lifetime Warranty

[Lifetime Warranty] 725-1426 Starter Solenoid - Compatible with MTD 925-1426 925-1426A 725-1426A 725-0771 925-0771 Snapper 18817 75671 Toro 112-0309 334009B 435-065 Mower

Save 13%
0.00
$15.70
$18.06
$15.70
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

725-1426 Starter Solenoid

Key Features

  • Voltage: 12V
  • Configuration: Two large terminals for battery and starter connections, one small terminal for the ignition switch
  • Function: Acts as a relay to engage the starter motor
  • Construction: Durable metal housing

Replaces / Cross-Reference Part Numbers

  • 925-1426A
  • 725-1426A
  • 925-1426
  • 725-1426P
  • 33-335
  • 112-0309
  • 334009B
  • 18817
  • 75671
  • 1751569

Compatibility & Fitment

  • Fits lawn tractors and zero-turn mowers from MTD, Cub Cadet, Troy-Bilt, Bolens, Huskee, Yard Machines, and Yard-Man
  • Specifically designed for many MTD front and rear engine rider models manufactured from 1990 to 1994

When to Replace

  • Engine does not crank or makes a single, audible click when the key is turned
  • Starter motor runs continuously, even after the key is released
  • Intermittent or no response from the ignition system

Installation Tips

  • Disconnect the negative battery terminal before beginning installation
  • Photograph or label the wiring configuration on the old solenoid before removal
  • Ensure all terminals and wire connections are clean and secure to prevent electrical issues
  • Confirm correct wire placement on the new solenoid before reconnecting the battery
Product image 1
Product image 2
Product image 1
Product image 2
Product image
  • WIDE COMPATIBILITY

    WIDE COMPATIBILITY

    This solenoid is compatible with MTD front and rear engine rider models 1990-1994
  • DURABLE MATERIAL

    DURABLE MATERIAL

    This part is made of high streng steel and ABS Plastic housing which is flexibility and flame-retardant, enhancing durability
  • SAVING SOLUTION

    SAVING SOLUTION

    BlueStars brings DIY solutions to help you deal with any trouble
  • IMPORTANT NOTE

    IMPORTANT NOTE

    This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility
Enjoy your fresh garden with the support of our replacement part!

Enjoy your fresh garden with the support of our replacement part!

Brand Model Number
MTD 925-1426, 925-1426A, 9251426A, 725-1426A, 725-0771, 925-0771, 25-1426, 1751569
Toro 112-0309
Snapper 18817, 1-8817, 75671, 7075671, 7075671YP
Stens 435-065
AYP 110832X
Husqvarna 532110832

FAQ

This solenoid is designed for a wide range of MTD front and rear engine rider models produced between 1990 and 1994. It is also compatible with various lawn mowers and tractors from brands including Murray, Snapper, Toro, Troy-Bilt, Husqvarna, and AYP.
This part replaces MTD 725-1426, 925-1426, 925-1426A, 725-1426A, 725-0771, and 925-0771. It also cross-references with Snapper 18817, 1-8817, 75671, 7075671, 7075671YP; Toro 112-0309; Murray 21261, 24285, 424285, 924285; AYP 110832X; Husqvarna 532110832; and Stens 435-065.
Common symptoms of a failing solenoid include a 'clicking' sound when you turn the key, the engine failing to crank despite a fully charged battery, or the starter motor continuing to run even after the key is released. If you hear a click but the starter motor does not engage, the internal contacts of the solenoid are likely worn or pitted.
This is a 12-volt, 3-terminal solenoid featuring 1/4-20 studs. It is a grounded-through-base unit with a 90-degree mounting bracket and a spade connector.
Replacing the solenoid is a straightforward task that typically takes 15 to 30 minutes. You will generally need a socket set or a wrench to remove the battery cables and the mounting bolts. Always disconnect the negative battery cable first to prevent accidental shorting while working on the electrical terminals.
If the engine still does not crank after installing the new solenoid, check the battery voltage, ensure the battery terminals are clean and tight, and inspect the safety interlock switches (such as the seat, blade engagement, or brake pedal switches). Additionally, verify that the ground connection at the solenoid mounting base is clean and free of rust or paint, as this is essential for proper operation.