American Standard Brand [Lifetime Warranty] 0130F00010 Furnace Flame Sensor Replacement - Compatible with Goodman Amana Furnaces | Pack of 2
Two 0130F00010 furnace flame sensors with metal rods and white ceramic insulators.
Two 0130F00010 furnace flame sensors featuring heat-resistant materials and precise flame detection design.
0130F00010 furnace flame sensor compatibility chart showing compatible brands, part numbers, and furnace models.
Dimensional diagram of 0130F00010 furnace flame sensor showing 3.8-inch length and handling instructions.
Infographic showing 0130F00010 furnace flame sensor components including ceramic insulator, terminal, bracket, and steel rod.
0130F00010 furnace flame sensor replacement part shown with infographic on fixing common furnace heating symptoms.
Six-step instructional guide for installing a 0130F00010 furnace flame sensor.
Comparison chart showing 0130F00010 furnace flame sensor quality versus generic alternatives.
Single 0130F00010 furnace flame sensor replacement part with mounting bracket and ceramic insulator.
Two 0130F00010 furnace flame sensors with metal rods and white ceramic insulators.
Two 0130F00010 furnace flame sensors featuring heat-resistant materials and precise flame detection design.
0130F00010 furnace flame sensor compatibility chart showing compatible brands, part numbers, and furnace models.
Dimensional diagram of 0130F00010 furnace flame sensor showing 3.8-inch length and handling instructions.
Infographic showing 0130F00010 furnace flame sensor components including ceramic insulator, terminal, bracket, and steel rod.
0130F00010 furnace flame sensor replacement part shown with infographic on fixing common furnace heating symptoms.
Six-step instructional guide for installing a 0130F00010 furnace flame sensor.
Comparison chart showing 0130F00010 furnace flame sensor quality versus generic alternatives.
Single 0130F00010 furnace flame sensor replacement part with mounting bracket and ceramic insulator.
Lifetime Warranty

[Lifetime Warranty] 0130F00010 Furnace Flame Sensor Replacement - Compatible with Goodman Amana Furnaces | Pack of 2

Save 30%
0.00
$10.62
$15.17
$10.62
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

0130F00010 Furnace Flame Sensor

Key Features

  • Detects flame presence in gas furnaces for safe ignition and operation.
  • Constructed from high-quality, corrosion-resistant metal and a durable ceramic insulator.
  • Direct replacement for specified part numbers.

Replaces / Cross-Reference Part Numbers

  • 0130F00010
  • B1172606
  • B11726-06
  • 20488501
  • TJFLS013
  • 2645136
  • AP4513976
  • AP6326767
  • L38035
  • ACS90453BXA

Compatibility & Fitment

  • Designed for select gas furnace models from brands including:
  • Amana
  • Daikin
  • Goodman
  • Janitrol

When to Replace

  • Furnace shuts down shortly after ignition.
  • Main burner fails to stay lit.
  • Frequent or intermittent system cycling.
  • Visible corrosion, carbon buildup, or damage to the existing sensor rod.

Installation Tips

  • Disconnect all electrical power to the furnace before servicing.
  • Handle the new sensor by its ceramic base to avoid transferring oils from your skin to the metal rod.
  • Ensure the rod is properly positioned to be engulfed by the burner flame for accurate sensing.
  • Confirm the wire connection is secure after installation.
Product image
Product image
Product image
  • SENSITIVE FLAME DETECTION

    SENSITIVE FLAME DETECTION

    Ensures the gas valve opens only when a flame is present, preventing gas buildup and keeping your home safe
  • FIX FURNACE'S SYMPTOMS

    FIX FURNACE'S SYMPTOMS

    Short cycling | No heat or inconsistent heating | Delayed ignition | Error codes | Dirty flame sensor rod | Cracked ceramic insulator
  • EFFECTIVE SOLUTION

    EFFECTIVE SOLUTION

    Enjoy the great feeling when your furnace works properly like before - BlueStars brings DIY solutions to help you deal with any trouble
  • HIGH QUALITY

    HIGH QUALITY

    Made of premium materials to withstand high temperatures and ensure accurate flame detection with long-lasting performance
WIDE COMPATIBILITY

WIDE COMPATIBILITY

Replaces Part Numbers: B1172606, B11726-06, 20488501, ACS90453BXA, P1257001F, P1257007F, ACS90703BXA, P1257002F, P1257008F, AP4513976, L38035. Compatible Brands: Kenmore, Amana, Goodman furnaces. *This replacement part is designed for specific appliances. Brand names are used for reference only.
FITS MODELS

FITS MODELS

GMS80603AX, GMS80604BX, GMS80603AN, GMS80604BN, GMS80804BN, GDS80403AN, GDS80603AN, GDS80804BN, GDS81005CN, GMSS960402BN, GMSS960603BN, GMSS960803BN, GCSS960402BN, GCSS960603BN, GCSS960804CN, GCSS961005CN, GCSS961205D, etc
6 SIMPLE STEPS

6 SIMPLE STEPS

1. Turn off furnace power, close gas valve, and remove the front panel. Then locate the flame sensor & Disconnect the wire; 2. Uncrew and remove the old flame sensor & Install the new one, secure it into place, and reconnect wire; 3. Reattach the panel, open gas valve and turn power back on. *Note: Use work gloves during installation for safety. Avoid touching the metal rod part as oils from your skin can cause carbon buildup and premature failure, hold it only by the ceramic base.
Material
‎Metal Rod Probe with Ceramic End
Measurement Accuracy
‎±3%
Mounting Type
‎Flange Mount
Output Type
‎Electrical Signal
Upper Temperature Rating
‎3.5E+2 Degrees Celsius
Part Number
‎0130F00010
Item Weight
‎0.352 ounces
Product Dimensions
‎4.2 x 1.2 x 1.81 inches
Color
‎As pictured
Number Of Pieces
‎2
Included Components
‎0130F00010 Flame Sensor

FAQ

This flame sensor is used on some gas furnace models from Goodman, Amana, and Daikin. Compatibility depends on the exact furnace model number, so the safest match is to verify your original sensor part number against the numbers 0130F00010, B1172606, B11726-06, 20488501, P1257001F, P1257007F, ACS90453BXA, TJFLS013, TJ-FLS013, 2645136, AP4513976, and AP6326767.
Known cross-reference numbers for this flame sensor include 0130F00010, B1172606, B11726-06, 20488501, P1257001F, P1257007F, ACS90453BXA, TJFLS013, TJ-FLS013, 2645136, AP4513976, AP6326767, and ER0130F00010.
The flame sensor verifies that the burners have ignited properly. If it does not detect flame, the control board shuts off the gas valve to prevent unburned gas from continuing to flow. A working flame sensor is an important safety component in a gas furnace.
Typical symptoms include the furnace burners lighting and then shutting off after a few seconds, short cycling, repeated ignition attempts, or the furnace failing to stay running even though the igniter is working. In many cases, the sensor is not fully failed but coated with oxidation or residue and can no longer read flame properly.
For many furnaces, this is a straightforward repair. Usually the job takes about 10 to 20 minutes and requires basic hand tools such as a screwdriver or nut driver. Always turn off power to the furnace and shut off the gas supply before opening the access panel. Remove the mounting screw, disconnect the sensor wire, swap the sensor, and reinstall it in the same position.
Yes. A flame sensor often stops working because of carbon buildup or oxidation on the metal rod. Light cleaning with fine abrasive pad material or very fine sandpaper can sometimes restore operation. If cleaning does not solve the problem, or the sensor is cracked, badly corroded, or damaged, replacement is the better fix.
If the problem continues, check the sensor wire connection, furnace grounding, burner flame quality, and control board error codes. Poor burner flame, dirty burners, weak ground, or ignition problems can mimic a bad flame sensor. It is also worth inspecting the igniter and air filter, since restricted airflow or burner contamination can contribute to unreliable ignition.