216-259 Mfd uF 330 VAC Capacitor

216-259 Mfd uF 330 VAC Capacitor

Key Features

• Capacitance: 216-259 MFD / uF
• Voltage Rating: 330 VAC
• Frequency: 50/60 Hz
• Terminals: Standard 1/4 inch male quick-connect
• Operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Construction: Dry, non-polarized electrolytic capacitor
• Case: Moisture and oil-resistant plastic housing
• Safety Standard: UL 810 Recognized

Replaces / Cross-Reference Part Numbers

• 100368-01
• 091A216B330DE8X
• CD60B-3CJ216259R-M1
• SCP-216-259/330VLTG
• TRMJ216

Compatibility & Fitment

• Application: Intermittent duty for single-phase AC motor starting circuits
• Fits fractional horsepower motors requiring a start capacitor with a 216-259 uF range and 330 VAC rating.
• Physical dimensions are approximately 1.81 in. diameter x 4.38 in. length. Verify measurements for proper fit.

When to Replace

• Motor hums but struggles or fails to start.
• Motor requires manual assistance to begin rotation.
• Capacitor case is visibly bulging, cracked, or leaking oil.
• Capacitance measures outside the rated 216-259 uF range when tested.

Installation Tips

• Disconnect all electrical power to the unit before performing service.
• Safely discharge the old capacitor by shorting its terminals with a resistor or insulated tool.
• Note the wire positions before disconnecting the original part.
• Ensure the replacement capacitor's voltage rating (VAC) is equal to or greater than the original.
• Match the capacitance range (uF/MFD) to the motor's requirement.