{"product_id":"lifetime-warranty-pucb98-control-board-heat-sensor-compatible-with-englander-pellet-multifuel-stoves-10cdv-10cpm-25ep-25epi-25ip-25paf-25pdv-25pdvc-25pfs-25pi-25puf-pucbhs","title":"[Lifetime Warranty] PU-CB98 Control Board Heat Sensor - Compatible with Englander Pellet \u0026 Multi-Fuel Stoves 10-CDV 10-CPM 25-EP 25-EPI 25-IP 25-PAF 25-PDV 25-PDVC 25-PFS 25-PI 25-PUF PU-CBHS","description":"\u003ch2\u003ePU-CB98 \/ PU-CBHS Control Board Heat Sensor\u003c\/h2\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Thermal Monitoring:\u003c\/strong\u003e Provides real-time heat data to the control board, allowing the stove to accurately determine when to activate the room air blower or trigger a safety shutdown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connector:\u003c\/strong\u003e Equipped with a standard white plastic molex-style connector for a direct, secure interface with the Englander control board, requiring no wire stripping or crimping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Insulation:\u003c\/strong\u003e Features high-grade insulated lead wires designed to withstand the intense radiant heat within the stove's internal cabinet without melting or shorting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Thermistor Probe:\u003c\/strong\u003e The sensor tip is encased in a corrosion-resistant metal housing to protect the sensitive electronics from the abrasive nature of pellet ash and soot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePU-CB98\u003c\/li\u003e\n\u003cli\u003ePU-CBHS\u003c\/li\u003e\n\u003cli\u003eEnglander Control Board Heat Sensor\u003c\/li\u003e\n\u003cli\u003eSummers Heat \/ Timberland Pellet Stove Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis heat sensor is compatible with a wide array of pellet and multi-fuel stoves manufactured by England Stove Works (ESW). Key compatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnglander Pellet Stoves:\u003c\/strong\u003e 25-PDV, 25-PDVC, 25-EP, 25-EPI, 25-IP, 25-PAF, 25-PFS, 25-PI, 25-PUF.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fuel Models:\u003c\/strong\u003e 10-CDV, 10-CPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand Cross-Compatibility:\u003c\/strong\u003e Also fits Summers Heat (SHP\/SHP series) and Timberland (TRP series) models that share the Englander chassis designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\"E-1\" or \"E-2\" Error Codes:\u003c\/strong\u003e The digital display on the control board shows an error code indicating the sensor circuit is either open (disconnected) or shorted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom Blower Failure:\u003c\/strong\u003e The fire is burning hot, but the room air fan never turns on to distribute heat, suggesting the sensor isn't telling the board the stove is warm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStove Shuts Down Early:\u003c\/strong\u003e The stove enters the startup sequence but shuts down after 15–20 minutes because it fails to detect a rise in temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Heat Damage:\u003c\/strong\u003e The sensor wires are melted, charred, or have been pinched in the stove’s side panels or by the auger motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Down:\u003c\/strong\u003e Always unplug the stove and let it cool completely before opening the side or rear access panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Placement:\u003c\/strong\u003e The sensor is typically mounted on the exhaust blower housing or a nearby firewall. Note the exact orientation of the old probe before removing the mounting screw to ensure accurate readings from the new unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Routing:\u003c\/strong\u003e Avoid routing the wires near the exhaust pipe or moving parts like the auger shaft. Use high-heat zip ties to keep the wiring harness clear of hot surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Connection:\u003c\/strong\u003e Ensure the molex connector is pushed all the way into the control board until it clicks; a loose plug is a common cause of intermittent \"E-1\" errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the Area:\u003c\/strong\u003e While the stove is open, use a vacuum to remove ash buildup around the sensor mounting point, as excessive ash can insulate the probe and cause sluggish performance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46497319518397,"sku":"AZ00221328","price":31.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00221328_1.jpg?v=1765940097","url":"https:\/\/bluestarsparts.com\/products\/lifetime-warranty-pucb98-control-board-heat-sensor-compatible-with-englander-pellet-multifuel-stoves-10cdv-10cpm-25ep-25epi-25ip-25paf-25pdv-25pdvc-25pfs-25pi-25puf-pucbhs","provider":"BlueStars Parts","version":"1.0","type":"link"}